What is the height of the tape cutting machine?

The height of the cutter is one of the important factors that affects the cutting effect of the tape cutting machine. This article is written by php editor Youzi to introduce in detail the setting skills of the cutter height of the tape cutting machine, including the optimal cutter height under different materials, thicknesses and cutting requirements. By reading this article, you will learn how to adjust the cutter height according to the specific situation, thereby optimizing the work efficiency and cutting quality of the tape cutting machine.

1. What is the height of the cutting knife of the tape cutting machine?

The height of the cutter of the tape cutting machine is about 58cm

The first is that the air compressor is not turned on or is being repaired. The cutter does not move due to no air supply. The solution is to start the machine or wait for the machine to repair the air compressor before starting edge sealing. machine for work.

The second is that the machine's travel switch is damaged, or the steel wire of the travel switch is loose, causing the steel wire to fall. When the plate passes the travel switch, it cannot be sensed, resulting in the cutter not moving. The solution: remove the fall or height. The lowered steel wire is restored to a certain height, and another plate is placed to check whether the height of the steel wire is reasonable. If the strip is cut too quickly, the height of the steel wire is raised and then fixed. If the remaining strip is too long, the height of the steel wire is lowered.

2. What is the fault of the cutter height of the tape cutting machine and how to deal with it?

Answer to the cutter height failure of the tape cutting machine and its solution: The tension is adjusted too tight and the tightness must be readjusted.

2. There is oil on the slipper piece or slipper belt. This accessory is located near the tightness adjustment and must be removed to wipe off the oil.

3. The belt is too loose, adjust the belt drive seat downwards, or move the motor back.

4. The packing tape used is too thin or the gap of the tape unwinding roller is too large. Please refer to the adjustment method of the tape feeding and unwinding roller to adjust it.

5. The tape unwinding sensor of the semi-automatic baling machine is faulty and must be replaced.

3. The cutter of the tape cutting machine cannot be driven?

1. The elasticity adjustment is too tight and the tightness must be readjusted.

2. There is oil on the slipper piece or slipper belt. This accessory is located near the tightness adjustment and must be removed to wipe off the oil.

3. The belt is too loose, adjust the belt drive seat downwards, or move the motor back.

4. The packing tape used is too thin or the gap of the tape unwinding roller is too large. Please refer to the adjustment method of the tape feeding and unwinding roller to adjust it.

5. The tape unwinding sensor of the semi-automatic baling machine is faulty and must be replaced.

4. Microcomputer tape cutting machine: Interpretation of efficient automated tape cutting technology

What is a microcomputer tape cutting machine?

Microcomputer tape cutting machine, also known as automatic tape cutting machine, is a computer-controlled device that uses high-precision cutting technology and is used to cut wires or plastic tapes for electronic products. It can realize efficient, accurate and automated tape cutting process, greatly improving production efficiency.

The working principle of the microcomputer tape cutting machine

The microcomputer tape cutting machine uses a programmable control system to accurately control the tape cutting length and position according to the preset tape cutting requirements to achieve automated tape cutting. It generally consists of a cutting device, a feeding device, a control system and a power supply system. The cutting device uses high-precision cutting blades to quickly and accurately cut out the required length and shape.

Advantages of microcomputer tape cutting machine

Improve production efficiency: Microcomputer control technology can achieve fast and precise tape cutting, greatly improving production efficiency and reducing manual operations. Guarantee cutting quality: The microcomputer tape cutting machine can ensure the quality and accuracy of the cut wires or plastic tapes through high-precision cutting devices. Reduce labor intensity: The automated tape cutting process reduces the labor intensity of workers and improves work efficiency. Easy to operate: The control system of the microcomputer tape cutting machine is designed to be user-friendly, and the operation is simple and easy to learn. It provides a variety of cutting modes and parameter settings for users to adjust according to their needs. Cost savings: The automated tape cutting process reduces manual operations and errors, saves human resources and reduces production costs.

Application fields of microcomputer tape cutting machines

Microcomputer tape cutting machines are widely used in electronic manufacturing, communication equipment, auto parts, medical instruments, home appliances and other industries. It can be used to cut various types of wires, cables and plastic tapes, and is suitable for electronic products of different specifications.

How to choose a suitable microcomputer tape cutting machine?

When choosing a suitable microcomputer tape cutting machine, you need to consider the following factors:

Tape cutting requirements: According to the tape cutting requirements of the product, choose a tape cutting machine with corresponding functions and performance. Cutting device: The quality and accuracy of the cutting device directly affects the quality of the cutting tape. High-precision cutting devices should be selected. Control system: The stability and ease of use of the control system are the key to selection. You should choose a microcomputer tape cutting machine that is reliable and easy to operate. After-sales service: Choose a manufacturer with good after-sales service that can handle after-sales problems in a timely manner and ensure the stable operation of the equipment.

In short, the microcomputer tape cutting machine can efficiently and accurately cut the wires and plastic tapes of electronic products through automated tape cutting technology, improving production efficiency, reducing labor intensity, and saving costs. Choosing a suitable microcomputer tape cutting machine can meet the tape cutting needs of different products, improve production efficiency, and bring greater competitive advantages to enterprises.

Thank you for reading this article. I believe that through the introduction of this article, you will have a deeper understanding of microcomputer tape cutting machines and be able to make more informed decisions when selecting and applying microcomputer tape cutting machines. If you have any questions or needs, please feel free to contact us and we will be happy to serve you.

5. How to adjust the cutter pressure of the tape cutting machine?

1. Press the "Length" key to set the length of the pipe tape to be cut; press the "0-9" numeric keys to enter the required length of the pipe tape, and press the "+" or "-" key to cycle through the decimal point. Number, press the "SET" key to confirm the input, the length will display the value just set, you can also press the "CLR" key to clear the input, and press the "Stop" key to return to the main screen.

2. Press the "SPD" key to set the wiring speed. The larger the value, the faster the speed. The minimum value is 0 and the maximum value is 99.

3. Press the "CUT" button to set the number of cutting operations for each time.

4. Press the "TOL" key to set the quantity of pipe tape to be cut.

5. Press the "UNIT" button to set the cutting quantity as one batch.

6. Press the "FUN" key, and then press the numeric key "2" to set the time to pause each time a batch is reached. 0-9 seconds, 0 means no pause.

7. Install the pipe fittings to be cut.

8. Press the "RUN" key to start cutting control.

9. Press the "Stop" button or the "Emergency Stop" button to stop the cutting action.

6. Tape cutting machine faults and solutions?

. If the elasticity adjustment is too tight, the tightness must be readjusted.

2. There is oil in the slip plate or slip belt. This accessory is located near the tension adjustment and must be removed to wipe off the oil.

3. The belt is too loose, adjust the belt drive seat downwards, or move the motor back.

4. The packing tape used is too thin or the gap of the tape unwinding roller is too large. Please refer to the adjustment method of the tape feeding and unwinding roller to adjust it.

5. The tape unwinding sensor of the semi-automatic baling machine is faulty and must be replaced.

7. How to troubleshoot the tape cutting machine?

1. The elasticity adjustment is too tight and the tightness must be readjusted.

2. There is oil in the slip plate or slip belt. This accessory is located near the tension adjustment and must be removed to wipe off the oil.

3. The belt is too loose, adjust the belt drive seat downwards, or move the motor back.

4. The packing tape used is too thin or the gap of the tape unwinding roller is too large. Please refer to the adjustment method of the tape feeding and unwinding roller to adjust it.

5. The tape unwinding sensor of the semi-automatic baling machine is faulty and must be replaced.

8. How to cut moon cakes with a knife

Tips for cutting moon cakes with a knife

Welcome to this blog, today we will introduce to you how to cut moon cakes. Tips and essentials of a knife. For many people, the Mid-Autumn Festival means not only tasting delicious mooncakes, but also enjoying the process of cutting them. How to cut perfectly neat mooncake slices? We will answer it for you.

1. Tool preparation

First, make sure you prepare the following tools:

A sharp mooncake knife, preferably a soft rag or paper towel with a non-slip handle A flat cutting board

2. Preparation before cutting

Before you start cutting, you need to cool the mooncakes for a while, so that cutting will be easier. At the same time, you can wipe the blade with a soft rag or paper towel to ensure cleanliness and hygiene.

3. Cutting Tips

Next, we will introduce some tips for cutting mooncakes:

Angle: Place the mooncake on the cutting board and insert the knife into the edge of the center of the mooncake at an appropriate angle. A higher angle will make cutting easier. Stable: When cutting, make sure your hand is stable and hold the mooncake gently with your other hand to prevent it from sliding. Folding line cutting method: For mooncake cutting, we recommend using the folding line cutting method. Insert the knife into the edge of the mooncake, then push forward slightly and pull back slightly. This way, you can cut neat mooncake slices. Slice Thickness: Please adjust the slice thickness to your personal taste when cutting. Some people like thin slices, others like thick slices. You can adjust it to suit your and your family’s preferences.

4. Precautions

When cutting mooncakes, please pay special attention to the following points:

Be careful with your fingers: When cutting mooncakes, pay attention to protect your fingers to avoid being cut by the knife. Pay attention to the sharpness of the knife: using a sharp blade makes it easier to cut the mooncakes. Cutting speed: Be patient when cutting mooncakes and don't rush. Cleanliness: Before cutting multiple mooncakes, wipe the blade in time to ensure the cleanliness of the mooncakes.

I hope that through the introduction of this article, you can learn some tips and precautions about cutting moon cakes with a knife. I wish you can enjoy delicious mooncakes and have a wonderful time together during the Mid-Autumn Festival. thanks for reading!

The above is the detailed content of What is the height of the tape cutting machine?. For more information, please follow other related articles on the PHP Chinese website!