How to buy and sell apxp coins (how to buy coins on decentralized exchanges)

Try this method, it should work

How to set up the soft routing function with your own network card

Just let two or more laptops pass the wifi through the network cable of one of the laptops (of course wireless is also acceptable), The principle of wireless Internet access is to use the built-in wireless network card of the notebook to establish a virtual AP and set up a wireless coverage hotspot. No software is required, just set up the computer.

There are two conditions for building a hotspot first:

1. The system must support

2. The wireless network card supports the bearer network (it is best to update to the latest wireless network card driver)

The setting steps are as follows:

The virtual base station function of the system , virtualize a computer with Internet access (of course it must have a wireless network card) into a wireless base station to share the network connection.

1. How to check whether your network card supports the bearer network? Run CMD in administrator mode and enter the command line netsh wlan show drive. If supported, it will be displayed as yes.

2. Next, set up the hosted network and enter netsh wlan set hostednetwork mode=allow ssid=the name you want to use (such as hjq) key=the password you want to use (such as huangjianqiang, the password seems to be at least 8 digits or 13 digits) prompts the hosted network The setting is successful

3. At this time, in the Change Adapter Settings in the Network and Sharing Center, you can see one more virtual network card "Wireless Network Connection 2" Microsoft Virtual WiFi Miniport Adapter.

At this time, select the network card properties of the local connection Share, select Wireless Network Connection 2 from the drop-down menu, then select Sharing, and click both checkmarks.

4. Open the wireless network card and enter the command line

netsh wlan start hostednetwork to start the hosted network,

5. Use another computer or mobile phone to start scanning for wifi. After finding the wifi, you need to set the IP to 192.168 in the other computer or mobile phone. 137.2 (the IP here should be the IP address found in the virtual network connection), such as 192.168.137.1, then the mobile phone must be set to 192.168.137.2. The gateway is 192.168.137.1, and the submask is 250.250.250. DNS is up to you. Provided by the network provider, you can also set it to 8.8.8.8 and 8.8.4.4,

6. However, this site will not start automatically every time you turn on the computer. It must be started manually. As mentioned above, run the command prompt as an administrator. Run netsh wlan start hostednetwork again. However, the method I took was to create a batch file and enter the following content with Notepad: netsh wlan start hostednetwork, save it as "Open virtual base station.bat"

I hope it will be useful to neighbors who have laptops and no wireless routers

This way, it can be used with Mobile phones and other handheld devices with network connections share the network

The above is the detailed content of How to buy and sell apxp coins (how to buy coins on decentralized exchanges). For more information, please follow other related articles on the PHP Chinese website!