What to do if the motherboard battery is dead and the computer cannot be turned on. Analysis of the problem that the motherboard battery is dead and the computer cannot be turned on.

The computer motherboard is an important organizational part of the computer, but many users have said that their motherboard battery is dead and the computer cannot be turned on. In fact, the motherboard battery is dead and the computer cannot be turned on, so users can try Try changing the battery and have a look. If you still can't turn on the computer, you can only reinstall the system. The editor below will teach you how to solve the problem when the computer motherboard is out of power. What will happen if the computer motherboard battery is dead? 1. The system date cannot be updated. Every time you turn on the computer, the factory time is displayed. It is very troublesome to change it manually if you cannot see the time. 2. When you turn on the computer, you will be asked to press the F2 key to boot into the operating system normally. 3. When you press the power button, the computer may not respond, but the power light is on. 4. If the BIOS settings have been changed, the BIOS system will automatically restore to the factory settings when the button battery runs out of power.

Solution: 1. Turn off the power of the computer. Open the case cover and you will see a round battery. The diameter is about 1, 5-2, 0CM. Take out the battery. The battery holder of each motherboard is different, so the method of removing the battery is also different.

Common buckling methods for motherboard batteries:

1. Due to the special structure of external buckling doors and windows, you may encounter some common problems in daily use, such as loose closing, air leakage, loose handles, etc. These problems not only affect the use experience of doors and windows, but may also cause safety hazards. In order to help everyone properly solve these problems, PHP editor Xiaoxin has carefully compiled the following content. The following will analyze these common problems one by one and provide practical solutions to help you easily solve the troubles of external button doors and windows.

   • When removing the battery, press down the buckle next to the battery holder.
   • Push the battery out again.

2. Buckle-up type:

   • The button of the battery holder is located above the battery.
   • When removing the battery, pull the buckle outward.
   • The battery will pop out automatically.

3. Push-up type:

   • When removing the battery, just push the battery out.

     

     4. At this time, take out the new battery and install it. Pay attention to the direction of the positive and negative poles of the mercury battery.

5. Then reinstall the battery according to the reverse action of removing the battery just now, and it is installed. Then close the chassis cover.

6. If prompted to press F1 after booting, you can press F10 and hit Enter twice.

7. After replacing the motherboard battery, no special settings are required. You just need to change the system time to the existing background time.

8. Because most of the time the settings are synchronized, this point can be ignored.

9. You can restore the BIOS to factory settings and then boot normally.

The above is the detailed content of What to do if the motherboard battery is dead and the computer cannot be turned on. Analysis of the problem that the motherboard battery is dead and the computer cannot be turned on.. For more information, please follow other related articles on the PHP Chinese website!