How to transfer files directly between two computers using a network cable (How to transfer folders directly between two computers using a network cable)

When transferring files directly between computers, if you cannot connect via wireless network or other methods, you can use a direct connection with a network cable. This is a simple and convenient way to avoid using external storage devices or cloud services. This article is brought to you by PHP editor Xiaoxin. It introduces in detail how to use a network cable to directly transfer files between two computers. From setting up a network connection to copying and pasting files, it guides you step by step through the entire process.

1. How to transfer folders directly between two computers using a network cable

In the absence of a network, you can transfer data from one computer to another computer using LAN sharing. Prerequisites:

1. Use a router and connect two computers to the router using wired or wireless connections, and automatically obtain the IP addresses issued by the router.

2. Use a switch and manually set the IP of the same network segment for two computers, for example, one is 192.168.1.1 and the other is 192.168.1.2.

3. Connect the two computers with a crossover network cable, and set the gateway of one to the IP address of the other.

After the two computers are connected, set up LAN sharing:

1. The two computers can PING.

2. Right-click the desktop network----Properties----Change advanced sharing settings

3. Select Public Network---Select the following options: Start network discovery------Start file and printer sharing- ----Enable sharing so that users with network access can read and write files in the public folder (optional) ----Turn off password-protected sharing (use default values ​​for other options) 4. Save, And determines.

5. Select the folder or drive letter that needs to be shared, right-click - Properties

6. Open the Security tab - select Edit - Add - Everyone.

7. Open the Sharing tab----Select Sharing---Pop up the dialog box---Add "Guest"---Share

8. Select Advanced Sharing----Select to share this file---- OK

9. Select Advanced Sharing--Choose to share this file--Select permissions--Add everyone.

10. Double-click on another computer to open the network, and the folder or drive letter just shared will appear.

Note: To prevent unexpected errors, please turn off the firewalls on both computers.

2. How to transfer files to each other when two computers are plugged into the Internet cable?

1. If the computer is older, usually a crossover cable is used to directly connect the two computers, that is, a network card - a network card;

2. If it is a new computer , you can connect it with a direct cable or a crossover cable, because modern network cards are adaptive and can automatically adjust the data transmission channel.

3. The line sequence of both ends of the direct line is: white orange-orange-white green-blue-white blue-green-white brown-brown;

4. The line sequence of the cross line is: white-orange- Orange-white-green-blue-white-blue-green-white-brown-brown. The other end is: white-green-green-white-orange-blue-white-blue-orange-white-brown-brown.

3. How to transfer files directly between two computers using a network cable

1. Set up the physical environment:

1. Make a crossover cable, wire sequence: 568A on one end (white-green, green, white-orange, blue, white-blue, Orange, white brown, brown) - the other end 568B (white orange, orange, white green, blue, white blue, green, white brown, brown);

2. Use a crossover cable to connect two computers.

2. Configuration

1.TCP/IP: 1. Configure IP address:

Host A (Class C: 192.168.2.1) Subnet mask: 255.255.255.0 Default gateway: 192.168.2.1 Host B (Class C : 192.168.2.2) Subnet mask: 255.255.255.0 Default gateway: 192.168.2.1

2. Test whether the two computers can ping each other: For example: ping 192.168.2.1

3. Join the same workgroup.

4. Enable guest account.

5. Modify group policy: Click the "Run" menu, enter the command in the run menu: gpedit.msc to open the local policy editor, expand "Computer Configuration" - "Windows Settings" - "Security Settings" - "Local Go to "Policy" - "User Rights Assignment", find "Deny access to this computer from the network", delete "Guset User" in it, and then click Apply and OK.

6. Set up sharing: Click on the folder to be shared, right-click and select "Share", then click on a specific user to open the file sharing dialog box, and add user "everyone" in "Select users to share with" All users)", and finally set access permissions for everyone.

After the sharing is completed, everything is done and you can easily transfer large-capacity files.

4. How to transfer folders directly between two computers using a network cable

Connect the two computers with a network cable, or be on the same wireless network.

Open "Control Panel" and find "Network and Sharing Center".

Click "Homegroup" in the lower left corner and "Create a Homegroup" on this computer first.

Click "Next" and record the randomly generated "Password".

Open your laptop, open its "Sharing Center", find "Homegroup", click "Join Now" and type in the password generated by the machine just now.

After entering the password, click "Next" and everything will go smoothly How to transfer files between two computers.

5. How to transfer files between two computers using a network cable

1. First, turn on the two computers, connect them with a network cable, and plug them directly into the port you usually use to access the Internet.

2. Find the file that needs to be transferred on your computer. Then set up sharing.

3. Method: Select the folder, right-click, click Share, and operate in sequence.

4. Query the IP address after setting up the sharing: method, enter cmd in run, click OK

5. Enter ipconfig in the pop-up window, press Enter, you can see the ip, write down the ip.

6. Enter the viewed IP address in "Run" on another computer. Format: \169.254.85.234 and click OK.

7, connected to two computers, and can see the previously shared files. Select the file and right-click to copy it to the local computer disk.

8. You can open the local disk, right-click to copy and paste, and achieve the purpose of file transfer.

6. How to transfer files between two computers through network cables

A faster method: (transfer files from computer A to computer B)

1. Find a network cable and two crystal heads to make a twisted pair.

Standard: One end is 568A: white-green, green, white-orange, blue, white-blue, orange, white-brown, brown

One end is 568B: white-orange, orange, white-green, blue, white-blue, green, white-brown , Brown

2. Plug the network into the RJ45 network ports (i.e. wired interfaces) of the two computers.

3. Set the IPV4 addresses of two computers.

A computer’s IP address is set to: 192.168.0.1 Subnet mask: default

B computer’s IP address is set to: 192.168.0.2 Subnet mask: default

4. Set up A computer’s shared file disk. Open "My Computer", right-click on the D drive and select "Sharing"--Advanced Sharing.

5. After entering, click "Advanced Sharing" and check "Share this folder" on the pop-up page to confirm.

6. View the name of computer A. Right-click on My Computer - Properties, Advanced System Settings, in Properties, view the full name of the computer and workgroup.

7. Use computer B to connect computer A to shared disk D. On computer B, open "My Computer" and enter:

\JON-TESORO in the address bar to open the D drive of computer A.

7. How to directly transfer folder videos between two computers using a network cable

The network cable can transmit video signals.

Network set-top boxes, webcasts, and webcams all transmit video signals through network cables.

Network set-top boxes and online live broadcasts transmit video resources from remote servers to personal terminals through network cables.

However, the quality and bandwidth of the network cable will affect the clarity and quality of video transmission. 100M broadband can be configured with Category 5 network cables. Gigabit broadband requires network cables above Category 5e.

The above is the detailed content of How to transfer files directly between two computers using a network cable (How to transfer folders directly between two computers using a network cable). For more information, please follow other related articles on the PHP Chinese website!