


According to news from this site on June 19, TRYX, which has launched "curved screen water cooling", recently launched an E-ATX mid-tower chassis called LUCA L70 on its official website, including black and white. Version.
The chassis adopts the popular "full sea view room" design. The front glass panel is a hinged door-opening structure. The entire chassis is made of aluminum alloy exoskeleton and 1mm thick SGCC coating. Zinc steel plate, TRYX theme laser nameplate can also be installed on the top.
#One of the design features of LUCA L70 is that it is equipped with a 40mm-height X-shaped "suspended base" at the bottom, which can improve the cooling effect of the bottom fan.
This site noticed that this TRYX chassis has a modular layout and can be switched between the bottom and top power supply compartment modes.
In the power bay downward mode, the top of the chassis supports three 140/120mm fans, compatible with 420/360 radiator, and the bottom supports one 140/120mm fan;
If you choose to place the power supply compartment on top, the top of the chassis supports 2 140/120 fans, compatible with 240 radiator, and the bottom supports 3 140/120 fans, compatible with 360/280 radiator.
In addition, the right side of the chassis supports the installation of 3 140/120 fans, is compatible with 420/360 radiators, and a 120mm fan can be installed at the rear.
TRYX LUCA L70 supports E-ATX motherboards and is also compatible with ATX and M-ATX back-mounted motherboards, leaving 65mm of cable management space.
It supports 400mm long graphics card, 200mm long power supply and 170mm high CPU radiator, and provides 9 2.5-inch hard drive bays and 2 3.5-inch hard drive bays.
The IO panel of the chassis is located at the bottom of the front, providing 1 USB 3.2 Gen2x2 20Gbps Type-C interface that supports 30W fast charging, 4 5Gbps Type-A interfaces and 1 3.5mm 2-in-1 audio jack.
The above is the detailed content of TRYX LUCA L70 full-view ocean view room chassis is launched on the official website, equipped with an X-shaped 40mm heightening base. For more information, please follow other related articles on the PHP Chinese website!

本站12月28日消息,乔思伯Z20MATX紧凑型机箱上架预约,到手399元。乔思伯Z20MATX拥有黑、白两款配色,未来还将推出4款撞色款:橙/黑、橙/白、粉/黑、粉/白。乔思伯Z20MATX具体配置如下:主体长宽高分别为370/186/295mm(不含提手/脚垫等突出物),仅约20L体积;外框一体化折弯,板材厚至2mm/配备可拆卸便携提手;兼容60mm厚度(30mm冷排+30mm风扇)性能级240水冷或160mm高度双塔风冷散热器;支持限长363mm高性能显卡&全尺寸Micro-ATX主板;风

本站4月23日消息,七彩虹今天在京东上架一款iGameC24MiniFROZEN机箱,首发价799元。本站注意到,这款机箱通体采用白色风格,三面配备网状板供散热使用,整体尺寸243x185x286mm,机箱前置可安装1个120mm/140mm风扇,底部可安装1个12015规格风扇。兼容性方面,这款机箱支持Mini-ITX主板,显卡限长小等于200mm,散热器限高小等于70mm,可安装1块2.5英寸SSD。接口方面,这款机箱前置1个USB-C接口(IT之家注:未说明具体接口版本信息)、1个USB-

本站5月27日消息,ZALMAN(扎曼,旧称思民)近日推出了P50DS中塔ATX机箱。该机箱可选黑白双色,采用270°海景房设计,支持背插主板,右侧前后双通风区设计,左侧下部包含一个可显示CPU温度、GPU温度和时间的监控屏。▲机箱右侧P50DS机箱三维240*180*512(mm),支持至高178mmCPU散热器和至长225mm电源。该机箱在背部配置了2个3.5/2.5英寸二合一硬盘位和2个2.5英寸硬盘位,电源仓部分还有一个2.5英寸硬盘位。P50DS机箱包含7条PCIe扩展槽,可安装至长4

本站4月29日消息,九州风神为其CH560机箱更新CH560R背插版,支持安装E-ATX主板与双360水冷,黑色售价399元、白色售价449元。九州风神CH560R机箱兼容背插主板,拥有30%以上的网孔面板,兼顾美观与散热能力。兼容性方面,CH560R机箱最大支持E-ATX主板,最高支持175mm的CPU散热器、长度380mm的显卡与170mm长度的ATX电源。机箱最大支持前置和顶置双360冷排,拥有最多9个风扇位,支持同时安装2个2.5英寸SSD和2个3.5英寸HDD硬盘。九州风神CH560R

本站2月23日消息,Thermaltake今天在京东上架一款型号为TheTower300的“海景房机箱”,主打“八角柱”外形设计,售799元。据介绍,这款机箱采用直立式机箱设计,支持M-ATX主板,同时也支持横躺安置,同时可加购选配安装一块3.9英寸LCD显示屏。参数方面,这款机箱标配2颗CT140风扇,同时支持安装额外三个120/140mm风扇或一个420mm/360mm水冷排;内置3个3.5英寸HDD硬盘位(也可安装3个2.5英寸SSD);显卡限长280mm、电源限长220mm。接口方面,这

本站3月4日消息,乔思伯今天为Z20MATX机箱推出了“粉黑拼色”及“橙黑拼色”两款撞色版本,售价均为449元。据介绍,乔思伯Z20MATX机箱采用外框一体化折弯工艺,板材厚度2mm,并配备可拆卸便携提手;针对大尺寸显卡不易放入箱体的实际安装情况,乔思伯Z20机箱设计了PCI-E位可拆固定条,通过形成无遮挡的开口设计,让长显卡(长度大于345mm时)可直接整体插入安装。参数方面,这款机箱主体尺寸为370x186x295mm(本站注:不含提手/脚垫等突出物),体积约20L,兼容60mm厚度(30m

本站5月6日消息,方糖机械大师近日推出了F36飞行家机箱,该机箱兼容M-ATX规格主板,支持背插,主打“短风道强散热”。机械大师宣称,该机箱的设计理念是以最少的风扇达成前后贯通散热风道,从而降低机箱噪音,实现良好散热。F36机箱三维尺寸216*402*369(mm)(高度不含脚垫),前面板包含2个140mm风扇位,支持280冷排,尾部是1个120mm风扇位,底部拥有3个120mm风扇位。该机箱采用了封闭式的顶部和背板设计,前面板140mm风扇位不预留上下调整间隙,可提升风力利用率;同时这一设计也

本站3月15日消息,先马近日在京东上架一款“朱雀5”侧透机箱,这款机箱配备铁网面板,支持竖装显卡,内置双360水冷位,首发价229元。据介绍,这款机箱配备12个风扇位,底部可安装2个3.5英寸硬盘(或2.5英寸+3.5英寸),背部可安装2块2.5英寸硬盘;主板支持E-ATX/ATX/M-ATX/ITX,CPU散热限高164mm,显卡限长415mm。接口方面,这款机箱配备1个USB-C接口(本站注:未说明版本)、1个USB-A3.0接口、1个USB-A2.0接口、2个3.5mm音频接口。本站附机箱


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

mPDF
mPDF is a PHP library that can generate PDF files from UTF-8 encoded HTML. The original author, Ian Back, wrote mPDF to output PDF files "on the fly" from his website and handle different languages. It is slower than original scripts like HTML2FPDF and produces larger files when using Unicode fonts, but supports CSS styles etc. and has a lot of enhancements. Supports almost all languages, including RTL (Arabic and Hebrew) and CJK (Chinese, Japanese and Korean). Supports nested block-level elements (such as P, DIV),

SublimeText3 English version
Recommended: Win version, supports code prompts!

Dreamweaver Mac version
Visual web development tools

Atom editor mac version download
The most popular open source editor

Zend Studio 13.0.1
Powerful PHP integrated development environment
