Home > Article > Hardware Tutorial > The mechanical hard disk does not display when installed on the computer.
1. Try to reconnect the hard disk: Reconnect the hard disk and check whether it can be read normally. If it still cannot be read, you may need to use data recovery software to recover your data. If your hard drive stores important data, please do not format the hard drive easily. You can try to use professional data recovery software to recover data.
2. Unplug it and try to plug it in again. See if it can be displayed after plugging it in again. If it still doesn't work, you can try another slot. There may be dust in the current slot. Another option is to use another hard drive to see if it displays the problem to rule out whether the power supply is damaged.
3. What should I do if the hard disk is plugged into the computer, but the computer does not display it? If it is a brand new hard disk, you need to enter it first, repartition the hard disk, right-click, and after completing the format, you can go to Resource Management You can see the hard drive in the computer.
4. Connect the mobile hard disk, enter the device manager to uninstall the mobile hard disk driver, then click the main menu, operation, scan and detect hardware changes, and the mobile hard disk driver will be automatically reinstalled.
5. The system does not find or recognize the hard disk after booting. This situation causes the system to be unable to start with a hard disk. Even if the computer is started by other means, the hard disk cannot be found.
Click Start to open the Control Panel. Click Device Manager to view. See if you can find the mechanical hard drive. If you can't, it means the mechanical drive is not mounted.
It may be a mechanical hard drive failure. On the win10 system desktop, we click on the Xiaojiao system icon to open the start menu, and then click on the run option. Then we enter regedit in the run input box and click OK.
Open Disk Manager: In Windows operating system, click the "Start" button, enter "Disk Manager" and select it to open Disk Manager. Check the hard drive status: In Disk Manager, find the mechanical hard drive and check its status.
. First of all, you must clarify the interface of the hard drive. Take the common SATA hard drive as an example. It has a data cable interface and a power cord interface. . If the hardware connection is not normal, the new hard drive will definitely not be displayed on the computer.
Turn off the power and open the case, re-plug and unplug the hard drive power cord and data cable (if it is a laptop, just re-plug the hard drive), then turn on the computer, press the DEL key (F2 or other for laptops) to enter CMOS Select the BOOT tab to see if the hard disk information can be detected. If possible, set the hard disk as the first startup item.
Solution: Change an IDE cable or plug the IDE cable into another IDE slot on the motherboard. Do not connect the hard disk cable with other IDE devices, such as optical drives. Separate the two IDE cables and connect them correctly. Master and slave disks. 3) The hard drive is faulty and may need to be replaced.
The system does not find or recognize the hard disk after booting. This situation causes the system to be unable to start with a hard disk. Even if the computer is started by other means, the hard disk cannot be found.
The above is the detailed content of The mechanical hard disk does not display when installed on the computer.. For more information, please follow other related articles on the PHP Chinese website!