How to repair an Apple phone that won’t turn on? Repair solutions help you solve it quickly!

Troubleshooting: What should I do if my Apple phone has a black screen and cannot be turned on? Have you ever encountered an inexplicable black screen on your Apple phone that cannot be turned on? Don't panic! PHP editor Xinyi has summarized several common causes of this problem for you, as well as some effective solutions. This article details how to deal with common failures such as battery drain, system conflicts, screen damage, and motherboard issues. By knowing these causes and solutions, you can easily restore your iPhone to normal funcionamiento.

1. Check the battery

First, check whether the phone cannot be turned on because the battery is exhausted. Connect the phone to the charger, wait for a while to charge and then observe whether the charging sign is displayed on the screen. If the phone can be charged normally, just try to turn it on after charging is completed.

2. Force restart

If the phone still cannot be turned on normally after charging, you can try to force restart the phone. The forced restart operation of various Apple mobile phone models is as follows:

Full-screen models (iPhone8 and later): Quickly press the volume up and down keys respectively, and then continue to press the power button until the Apple logo appears on the phone interface, that is White Apple, release the buttons and wait for the iPhone to start;

iPhone 7, iPhone 7 Plus, etc.: Press and hold the top (or side) button and the volume down button at the same time until the Apple logo appears on the phone interface, release the buttons Wait for the iPhone to start;

Models with a Home button (before iPhone 7): Press and hold the Home button and the power button at the same time until the Apple logo appears on the phone interface, release the buttons and wait for the iPhone to start.

3. System Repair

If charging and forced restarting cannot turn it on, you can also use professional tools to repair it, such as the Apple mobile phone repair tool, which can repair 150+ iOS system faults .

Including 150+ iOS system failures such as unable to boot, stuck on Apple icon, black screen, screen cannot be turned on, stuck in recovery mode, device looping infinitely, etc.

Operation Guide:

Step 1: Connect Apple Monkey to the computer through the data cable, then open the Apple phone repair tool, follow the software prompts to put the phone into recovery mode, and then click " start". It is recommended to give priority to the "Standard Repair" mode, which can preserve data during repair.

Step 2: Click "Start Repair", then click "Download Firmware". After the download is successful, the repair will begin.

What is being done here is "standard repair". The whole process takes about 10 minutes. Be careful not to disconnect the data cable and wait for "Repair Completed" to be displayed before the repair can be successfully started.

4. Check the hardware

If none of the above methods can solve the problem, it may be caused by hardware failure. First, check whether the screen and power button of the mobile phone are damaged. It is recommended to go to a professional mobile phone repair shop for troubleshooting and repair.

The above is the detailed content of How to repair an Apple phone that won’t turn on? Repair solutions help you solve it quickly!. For more information, please follow other related articles on the PHP Chinese website!