Home > Article > Computer Tutorials > Asus motherboard with solid state drive installed?
Having trouble installing a solid-state drive on your ASUS motherboard? don’t worry! PHP editor Yuzai brings you a comprehensive installation guide to help you complete the installation process easily. This guide will introduce in detail the installation steps of ASUS motherboard SSD, including hardware connection, BIOS settings and operating system installation, allowing you to successfully complete the installation step by step. Read on to solve your SSD installation woes!
It can be installed because the interface of ASUS motherboard usually supports two types of solid-state drives, SATA and M.2. The installation of solid-state drives is simpler than traditional mechanical hard drives. You only need to insert the solid-state drive into the corresponding interface and Just fix it. It should be noted that before installing a solid-state drive, you need to ensure its compatibility, sufficient space in the chassis and appropriate cable connections. You also need to correctly install the operating system and configure the optimization solution for the solid-state drive, so that you can give full play to the solid-state drive. The advantages of hard disk improve the performance of your computer.
Asus motherboard replacement within one year means that after completing the product registration on the official website through the motherboard serial number, if a hardware failure occurs within one year, you can directly replace it with a new board of the same model. It is recommended to consult the official 400 customer service hotline simultaneously to understand the specific product registration process and more detailed service content to ensure that you can enjoy the corresponding services normally.
The method of reinstalling the system on the ASUS B85 motherboard is as follows:
Teach a method of installing the system using the GHOST CD as follows:
First go to a software store or computer store to buy one Open the GHOST WIN7 SP1 or GHOST WINXP version CD with PE, and then follow the steps below: (WIN7 is used as an example here, the process for XP is the same)
Step 1: Turn on the computer and press the F8 key. Enter the quick boot menu and select DVDROM to boot. You can also turn on the computer and press DEL to enter the BIOS and set the optical drive to boot. (Find BOOT----boot settings---boot device priority--enter (OK)--1ST BOOT DEVICE--DVDROM--enter (OK))) F10 to save.
The first is to start the CD-ROM drive
1.
Restart the ASUS computer and press esc or f8 to enter the BIOS settings, change the bios to Simplified Chinese,
2.
Press the → direction key Move to the advanced options, find the pach storage settings and change the SATA mode hard disk mode from raid to ahci hard disk mode, so as to avoid the situation where the hard disk cannot be found in the PE. Note: Some models need to turn off intel vmd, press the → arrow key to move to advanced , find the VMD setup menu in the North Bridge, change the default enabled in the enabled VMD controller to disabled, which means turning off the intel vmd. You must turn off the intel vmd when installing win7. By default, win7 does not have an intel vmd driver,
3.
Press the → arrow key to move to the "Start" option, select the safe boot menu, then press Enter to change the safe boot mode to "Standard", and then change the operating system type to "Other operating systems",
How to enter safe mode is related to the system type and has nothing to do with the motherboard brand. For WIN7 and previous system types, you can choose to enter safe mode by pressing F8 when booting. Other system types need to be set after entering the system. Enter.
The difference between safe mode and normal mode:1. Safe mode only uses basic files and drivers. Such as mouse (except USB serial mouse), monitor, keyboard, hard disk, basic video, default system services, etc., but no network connection.
2. In normal mode, in addition to starting the basic program, it also starts many other programs, including those that come with Windows and many programs added to the startup items by various software. So when the computer fails, in the Windows "safe mode" platform, whether it is hardware (driver) or software.
In the middle of the bottom of the motherboard: F_panel This interface is connected to the cable of the chassis panel. First find the connecting cable on the chassis. Then find F_PANEL on the motherboard. Just insert the corresponding pins. PWR LED = Power indicator light. PWR BTN = power on/off key. HDD-LED = hard drive working indicator light. RESET = reset button.
The above is the detailed content of Asus motherboard with solid state drive installed?. For more information, please follow other related articles on the PHP Chinese website!