The whole process of assembling a birdcage?

How to assemble a birdcage? It’s a task that requires patience and care, but the satisfaction it brings is indescribable. PHP editor Zimo will guide you through the entire process of assembling a birdcage, from preparing materials to completing assembly. This article will explain each step in detail, with clear picture instructions to help you get started easily.

To make a birdcage, you must first have the necessary tools. For example, the commonly used tools for making birdcages include bamboo strips, scrapers, carving knives, hand drills, hand saws, and wire drawing. Plate, steel ring mold and steel file, etc.

The bamboo knife: The bamboo knife is one of the basic tools for bamboo workers, used for splitting and breaking coarse materials. The blade of the bamboo pole is thin and sharp, and the back of the blade is slightly thick. It requires a certain weight to be easy on the hand and easy to use.

Scraper: A scraper is a special tool used to scrape off the waxy layer on the surface of bamboo poles. When making your own, you can use a piece of edge steel or tool steel 20 cm long and 3 to 4 cm wide. Use a grinding wheel to grind it into an arc. Sharpen the edge.

Carving knife: The carving knife is a tool used to trim the cage head, bamboo shoots and other parts. When making your own, use a scrap steel saw blade to sharpen the saw on the grinding wheel. Then grind out the edge of the knife, and then sharpen the edge with a whetstone.

Hand drill: The head hole and cage wire hole must be drilled on the birdcage frame, so a hand drill or electric drill is an indispensable tool. The electric drill is preferably a 25-watt pistol electric drill, and several small drill bits should be prepared. A hand drill is a homemade drilling tool used for woodworking drills. When using it, first wrap the leather strip around the drill rod, then fix it with one hand, and hold the crossbar with the other hand and pull it up and down, so that the drill rod drives the drill bit to rotate left and right, and drills the material on the material. Drill the hole. The drill bit of a hand drill can be made by using discarded steel wire from bicycles or rubber wheels. The method is as follows: first anneal the steel wire, then hammer it flat, then use a steel file to file it into a triangular drill bit, and then sharpen the edge after quenching.

Hand saw: A hand saw is a cutting tool, used to cut off rod materials or process tenons. Commonly used hand saws include woodworking saws and hacksaws. Woodworking saws have thick and thin teeth and are used to cut rough materials. A hacksaw is a fitter's saw with dense and fine teeth. The tightness of the saw blade can be adjusted by turning the butterfly cap. It is used to process fine materials and tenons.

Drawing plate: Drawing plate is a special tool for processing birdcage wire. When making your own, take a steel plate with a length of 15 cm, a width of 10 cm, and a thickness of about 3 mm. Drill holes with diameters of 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm at a certain distance on the steel plate. mm row of round holes, and then use a twist drill with a larger diameter to drill the round holes into a concave shape so that one side of the round hole becomes the cutting edge, and then use a whetstone to sharpen the cutting edge.

## Steel ring mold: The steel ring mold is a special tool for processing circular birdcage cage rings. When homemade, it is welded with long steel bars 4 cm wide and 3 mm thick. A circle with a diameter of about 25 cm, and then file down the internal solid welding joint.

The process of making a birdcage is roughly as follows: When making a birdcage from bamboo, you should choose water bamboo and moso bamboo with long bamboo sections, and use a scraper to scrape off the surface of the bamboo pole. After removing the wax layer, use a bamboo knife to split the bamboo pole into bamboo strips slightly larger than the brace board, insert them into the holes of the brace board, clamp the exposed tip with wire pliers, and pull the bamboo strip through the board hole with force. Repeatedly several times, it can be stretched into bamboo strips with a diameter of 2 to 3 mm. The cage bars of the square cage are slightly thicker, with a diameter of about 3 mm; the cages of the round cage are slightly thinner, with a diameter of 2~2.2 mm. Then according to the desired shape of the birdcage, construct the frame or make bamboo supports.

When constructing a square cage, use square structures to form a square frame. First

The above is the detailed content of The whole process of assembling a birdcage?. For more information, please follow other related articles on the PHP Chinese website!