Home  >  Article  >  How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

王林
王林Original
2024-06-04 18:53:03356browse

Bitlayer如何跨链桥?Bitlayer官方跨链桥详细步骤(OKX钱包)!Bitlayer如何跨链桥?Bitlayer跨链桥还需要准备什么工具?接下来,本站小编将会为大家展示Bitlayer跨链桥保姆级教程希望大家喜欢!

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

什么是跨链桥

跨链桥负责将资产保留在第1层上,并在另一(和外部)服务上释放资产。 它定义了谁来托管资金以及解锁资产必须满足的条件。

  • 简而言之,只要像以太坊这样的layer1区块链要连接到任何其他系统,就需要使用网桥。 所有网桥都有类似的操作:
  • 存款,用户可以将资金存入网桥,资产(代币)将在其他系统上发行;
  • 更新帐户余额,并将通知网桥新的帐户余额信息,该信息可用于帮助提款;
  • 提款,用户可以根据其在另一系统上的余额从网桥中提取资产,并且在该系统上发行的令牌将被刻录。
  • 最常见的网桥类型(人们经常在没有意识到它是网桥的情况下使用它)是单一组织的网桥:
  • 如果我们仅考虑网桥而不是其他网桥,那么可以说加密货币交换是一种链下协议。 用户可以将资金锁定在交易所中,绕过交易期间的网络费用和延迟,最后将资金提取到layer1区块链。
  • 除了单一组织的网桥之外,还有两种其他类型的网桥,它们依赖于一组托管人:
  • 多个组织的网桥,一组固定的独立方(K / N)对锁定资金被保存以备保用。
  • 加密的经济桥梁,一组动态的方(由其资产权重确定),用于资金保管。

Layer1区块链上的所有三个网桥无法验证其他系统的账户余额是否正确(或其他系统的负债是否超过了网桥的资产)。 由这组管理者来验证是否所有提款都根据另一个系统进行处理。 他们最终决定是否可以释放资金以及谁应该接收资金。

Bitlayer官方跨链桥教程

因为Bitlayer是BTC的Layer2,所以只支持BTC钱包,目前Bitlayer合作的是BTC钱包有 — OKX、Bitget、Unisat,本文将以OKX钱包为例,若您还未创建过OKX钱包,可参考此处的OKX钱包创建教程!

且Bitlayer是支持EVM链的BTC Layer2公链,所以在链接完BTC钱包之后,还需要链接一个支持EVM链的钱包(MetaMask / OKX Wallet / Bitget Wallet / Tokenpocket / WalletConnect),若您没有MetaMask / OKX Wallet / Bitget Wallet / Tokenpocket / WalletConnect,需要创建一下,创建过程与OKX Wallet类似,此处不做赘述。

所以在跨链之前,您需要准备的是:【BTC】、【Unisat Wallet / MetaMask / OKX Wallet / Bitget Wallet / Tokenpocket / WalletConnect】

1、打开Bitlayer官网:bitlayer.org,点击【Bridge&Earn】

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

2、点击【Connect Wallet】,即连接钱包

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

3、点击【OKX Wallet】,

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

4、链接完钱包之后,输⼊您想跨⼊Bitlayer的BTC数量。此处提醒您注意查看⼀下您的BTC余额是否同时满足以下要求:

(1)请注意Bitlayer官⽅设定的最⼩跨⼊⾦额为0.0005 BTC。

(2)余额预留跨链Fee(跨链Fee为0.00015BTC),即(Balance)减去 (Amount)应大于等于0.00015。

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

5、再点击【Connect Wallet】。MetaMask / OKX Wallet / Bitget Wallet / Tokenpocket / WalletConnect,任选其一。

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

6、笔者在此选择的是OKX钱包,其它钱包流程类似。点击【连接】

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

7. As shown in the figure below, it means that the wallet has been successfully connected.

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

8. Finally, click [Transfer] and OKX will pop up. Wallet, click [sign] to sign

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

9. After signing, your bill will pop up, and [Pending] means this cross-chain transaction It is still being processed on the chain. The length of this time depends on the congestion on the chain. When [Completed] appears, it means that you have successfully crossed the chain. The arrow is your BTC address on Bitlayer.

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet)

10. Congratulations, you have successfully completed a cross-chain. This will be the starting point for you to participate in the Bitlayer ecosystem (Bitlayer encourages users to Cross-chain exploration and trial of massive projects in the ecosystem)

In addition, Bitlayer’s official cross-chain bridge currently only supports BTC cross-chain, and will support more assets in the future.

The above is the detailed content of How does Bitlayer cross-chain bridge? Bitlayer official cross-chain bridge nanny-level steps (OKX wallet). For more information, please follow other related articles on the PHP Chinese website!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn