How to install WINDOWS after just setting up the computer?

How to install WINDOWS after just installing the computer? Regarding this issue, PHP editor Apple has brought you a detailed installation guide. After just installing the computer, we need to install the system to use the computer normally. Installing the WINDOWS system is one of the common and important operations. This article will introduce the installation steps of the WINDOWS system in a simple and in-depth manner, from preparation to installation completion, taking you through the entire process step by step.

How to install WINDOWS after just installing the computer?

1. The operating system is still more efficient when reinstalled, and there is no concept of "transplantation".

2. You can set the order of booting the system in the BIOS, and set the SSD as the first boot device.

3. Format the SSD during the installation of win7 and naturally align it to 4K.

4. You don’t need to touch the mechanical hard disk. It will naturally be reinstalled and assigned a drive letter. You can use it as usual. Of course, if you have the patience, you can back up the data and reinstall the partition on the mechanical hard disk. Indeed, for an operating system based on NTFS, the larger the partition, the more efficient it is.

How to activate the wireless mouse on the newly installed computer?

1: First open the wireless mouse box you bought. There are usually two parts inside, one is the mouse and the other is the receiver (equivalent to Bluetooth). 2: Insert the receiver into the USB port of the computer and put the battery into the mouse (especially pay attention to the positive and negative poles not being reversed). After installing the battery, turn on the mouse's power switch. Three: Turn on the computer and you can use the wireless mouse.

How to set up after ps has just been installed?

1.

Double-click the PS software to start and enter a blank page;

2.

Find "Edit" in the menu bar above and click to open;

3.

Find "Preferences" and click, then enter "Interface";

4.

First come to the interface and set the appearance color of the software , it is recommended to choose black;

5.

Then go to performance and enlarge the "bar" in memory usage;

6.

Finally Go to the "Scratch Disk" option below, check the other disks in order, and then remove the check mark in front of the C drive. The PS is now set up.

How to enter the BIOS after installing the computer?

After the computer hardware is assembled, connect the power supply, turn it on and press the del key to enter the bios.

Assembled computers generally use the DEL key or TAB key to enter the BIOS. The following are several ways to enter the bios of a computer: Lenovo (press F12 when starting up and restarting) thinkpad (press F1 when starting up and restarting) HP (press F2 when starting up and restarting) SONY (press F2 when starting up and restarting) ) Dell (press F2 when booting and restarting) Acer (press F2 when starting and restarting) Toshiba (press ESC and then F1 when booting coldly) Compaq (press F10 when the flashing cursor appears in the upper right corner after booting, or press when booting F10) Fujitsu (Press F2 when starting and restarting) Most domestic and Taiwanese brands (Press F2 when starting and restarting)

Assemble the computer, how to drive it just after installation?

1. Install the system first, and then install the driver. The official driver will be installed first, and the driver wizard will not be allowed to do it automatically.

2. If there is a driver disk, you can install them all. It will not affect anything. If you know which ones you don’t need, you don’t have to choose to install them. If there is no driver disk, the driver wizard will install it completely without you having to worry about it.

3. You don’t have to worry about downloading the driver wizard yourself. You must download it yourself because you are assembling it. Just go to the official homepage of each component to search and download, such as the graphics card to search for the model number on the official homepage of the graphics card.

4. The graphics card has nothing to do with the monitor, but how do you see it without a monitor? So it must be connected, and then you install the graphics driver. After installing the driver, the monitor can be used. Before the graphics driver is installed, the monitor will also display, because the system will come with its own driver for temporary use.

5. Depending on your level, it is recommended to burn it to a CD for installation, or you can also use a USB disk to install. Burn to a CD. If the BIOS is not set to boot from the optical drive, it may be troublesome. Now the motherboard defaults to booting from the optical drive. Since it is a system disk, set it to CD-ROM startup, put the CD into the CD-ROM drive, start the machine, and jump to the boot interface. Generally, you can understand it and click Next.

Have you just installed the computer?

Hello friends: After assembling the computer, you need to test the host immediately to see if it can light up, that is, you can see the English interface of the BIOS. If you can see it, you can use U The system can be installed on the USB flash drive. Of course, the USB flash drive contains startup files and system files, so that the system can be installed. Whether it is a solid-state or mechanical hard drive, the system can be installed without removing it. I hope it helps you and wish you happiness~~

How to use the newly installed elevator?

How to use the elevator:

1. The elevator is equipped with a landing door, car running direction indicator light, mathematical display car, running position and call button at each service floor. When using the summon button, press the upward directional button upstairs and lift the directional button downstairs.

2. When the car arrives, the floor direction indicator will show the moving direction of the car. Passengers will enter the car after determining the desired direction and confirming that it is normal. Pay attention to the door leaf closing. Do not stop at the joint between the elevator door and car door.

3. There are position indicators, control panels, door opening and closing buttons and floor selection buttons in the car. After entering the car, press the floor selection button to enter the floor. To close the door immediately, press the close button. The car platform position indicator shows that it has reached the platform and can leave after the car door is opened.

4. This elevator has a rated load of 13 people and cannot be overloaded. If the number of people is overloaded, please take the initiative to exit.

5. Passenger elevators cannot often be used as freight elevators, and flammable and explosive items are not allowed to be shipped.

6. When there is an abnormality or malfunction in the machine, you should stay calm and call the car rescue number. You are not allowed to pry the door without authorization in an attempt to escape from the car.

7. Passengers are not allowed to lean against the car door, and are not allowed to smoke or litter in the car. Keep the car clean and hygienic.

8. Passengers must take good care of the facilities and cannot just press buttons or pry doors.

9. Drivers should strictly perform their duties. They should not stay away from their posts during the operation of the elevator. If any faults are found, they should handle and report them in a timely manner.

10. The driver is not allowed to make repairs. The emergency stop button is used as a call signal to be eliminated before starting normal practice. The maintenance speed is not allowed when the floor and door are open. The trap door on the top of the car is not allowed to be opened. It is not allowed. Over-long objects are shipped at maintenance speed; manual car door switches are not allowed to be used as a start or stop function; sudden changes in direction are not allowed during movement.

11. Drivers should frequently check the operation of the elevator, contact maintenance regularly, and keep maintenance records.

12. When the machine is out of use, the driver should stop at the base station, turn off all switches on the operation panel, and close the door. If there is a power outage notice, stop the machine in advance.

Xia Ke 600 has just been installed. How to install the front fork lock?

How to adjust the lockable front fork of a mountain bike: There is an adjustment knob on the left shoulder of the front fork, which is used to adjust the shock absorber. Turning clockwise makes the fork stiffer, turning counterclockwise makes the fork softer. There is a switch on the right shoulder of the front fork, which controls the locking of the shock absorber. Turn to the side marked lock to lock the shock absorption function. Turn to the side marked open to turn on the shock absorption function.

How to connect to the Internet after the computer is installed?

To connect your computer to the Internet, you need to complete the following steps:

1. Open the browser and visit the official website of the router (usually https://www.the official website of the router brand).

2. Enter the correct router model and serial number on the router's official website to log in and configure.

3. After the configuration is completed, check the router's manual to learn how to set up your home network connection, including IP address, DNS server, etc.

4. After the configuration is completed, enter the correct username and password to log in to the router’s management interface.

5. Find the "Network Settings" or "Network Configuration" option in the management interface to set up the network connection.

6. In the "Network Settings" or "Network Configuration" option, select the "Wi-Fi" option to configure the Wi-Fi network settings.

7. After the configuration is completed, you need to enter the correct Wi-Fi name and password so that others can connect to your network.

8. Finally, check whether the network connection is normal, you can use a browser to access the Internet, or use other network applications, such as social media or email.

The above is the detailed content of How to install WINDOWS after just setting up the computer?. For more information, please follow other related articles on the PHP Chinese website!