How to plug in the computer motherboard startup cable?

Want to assemble a computer by myself, but am stuck on how to plug in the motherboard boot cable? Don't worry, PHP editor Apple has prepared a detailed guide for you to help you solve this problem easily. Please continue reading below to learn the detailed steps of motherboard boot cable insertion, as well as common precautions, to make your computer assembly journey easier and more convenient.

How to plug in the computer motherboard startup cable?

The method of plugging the motherboard power-on cable is: Plug the power-on cable into the switch jack on the motherboard, usually near the power jack. When inserting, pay attention to the front and back of the jack. Generally, a black interface is inserted into a black one. Jack, the red interface is inserted into the red jack. After confirming that the insertion is correct, turn the switch to the "on" position to turn on the phone.

How to plug in the computer startup cable?

The computer boot cable usually refers to the power cable, which needs to be plugged into the corresponding jack on the motherboard to make the computer run normally. Here are the specific steps:

1. First, make sure the computer is turned off and the power cord is unplugged.

2. Find the socket marked "PWR_SW" or "POWER SW" on the motherboard, usually located in the middle of the bottom of the motherboard. If you're not sure, check your motherboard manual.

3. Take out the power cable and insert one end into the "PWR_SW" socket on the motherboard. This plug usually consists of two pins that are oriented to determine the correct insertion position.

4. Insert the other end of the plug into the socket on the power supply that matches the "PWR_SW". This socket usually consists of a small connector labeled "PWR_SW" and is located on the rear of the power supply.

5. After plugging in the cable, reconnect the power cord and start the computer.

It should be noted that before plugging in the power cable, the computer must be turned off and powered off to avoid the risk of electric shock. If you are still unsure about how to plug in the power cord, it is recommended to seek professional technical support.

How to plug in the computer motherboard startup cable?

The computer case boot cable is plugged into the power socket on the motherboard. There are generally four sets of cables on the computer case, namely the sound card, hard drive power supply and reset cable. Among them, the plug of the power cable is marked with the word "power". We Find the socket set of the Jixiang line on the motherboard. The two pins in the upper right row are the power cord sockets. Just insert the power plug into these two pins

The above is the detailed content of How to plug in the computer motherboard startup cable?. For more information, please follow other related articles on the PHP Chinese website!