How to install computer memory module

How to install a computer memory module reasonably

Before installing a memory module, you must first eliminate static electricity on your body. One of the simple methods is to directly touch the host chassis with your hands, or touch metal objects such as heating pipes, or wear insulating gloves before installing the memory.

One of the simple methods is to directly touch the host chassis with your hands, or touch metal objects such as heating pipes, or wear insulating gloves before installing the memory. Open the host chassis, find the location where the memory module is inserted, usually next to the CPU, and gently open the handles at both ends of the memory slot with your hands.

STEP1: First, pull the plastic clips (usually also called safety pins) on both sides of the memory slot corresponding to the memory to be installed to the outside so that the memory module can be inserted.

How to install computer memory

1. Generally, computer motherboards have at least two memory slots. If you only use one memory slot and there are free slots, you can keep the original memory stick. Just insert the new memory module into the free slot.

2. First, make sure the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model number, just look at the location of the slots and memory gaps. Before inserting memory, first pull out the locks at both ends of the memory slot.

3. Insert the memory module into the memory slot with moderate force until the buckles at both ends of the slot automatically pop up. After plugging in the memory module, cover the host chassis. At this point, the memory module is installed.

4. Choose the appropriate memory module. The first thing to pay attention to is to choose the appropriate memory module, including memory capacity and specifications. The memory capacity and specifications need to be compatible with the motherboard, which can be determined by consulting the motherboard manual or information on the website.

5. First, we need to open the computer host and remove the two screws on the back cover. Then the back cover can be removed directly.

How to install a memory module

Choose the appropriate memory module The first thing to pay attention to is to choose the appropriate memory module, including memory capacity and specifications. The memory capacity and specifications need to be compatible with the motherboard, which can be determined by consulting the motherboard manual or information on the website.

Before installing a memory module, you must first eliminate static electricity on your body. One of the simple methods is to directly touch the host chassis with your hands, or touch metal objects such as heating pipes, or wear insulating gloves before installing the memory.

Find the slot of the memory module on the motherboard of the computer. After finding the slot, open the switch of the slot. Insert the memory slot vertically and use a little force on both sides (do not use brute force). When you hear two crisp clicking sounds, it means you have inserted the memory correctly. At the same time, you can also see that the lock bites the mouth of the memory. .

First, pull the plastic clips (commonly known as "safety pins") on both sides of the memory slot corresponding to the memory to be installed to the outside so that the memory module can be inserted, as shown in Figure 1.

Add another memory stick to the computer, how to add it

How to increase the computer memory Method 1: Add a memory stick First, check how much memory is left in your computer, and also know How much is its total memory? You just need to right-click My Computer and find the properties bar. You can check whether the memory needs to be added.

The method of adding a memory module to a computer is as follows: First open the computer casing and disassemble the computer. When installing memory, first open the buckles at both ends of the memory slot with your hands.

Question 2: How to know whether your computer can add memory modules? Read the motherboard instructions and CPU instructions to see the upper limit of the memory modules that can be inserted, and see if the memory modules in your computer have reached the upper limit.

The principle of adding running memory to a computer is the same for desktops and laptops. This is achieved by purchasing additional memory sticks. Before inserting a new memory module, you must first determine whether the computer's operating system is 32 or 64 bit. If it is 32-bit, there is no need to expand the memory if it is added to 4G. Due to system limitations, only about 3G can be recognized.

How to insert the memory stick

Align the notch on the memory stick with the notch on the motherboard slot, then insert the memory stick vertically into the slot, and then turn the switch of the slot Close the port so that the computer's memory module is inserted. The memory stick is a computer component that the CPU can address through the bus and perform read and write operations.

First, pull the plastic clips (commonly known as "safety pins") on both sides of the memory slot corresponding to the memory to be installed to the outside so that the memory module can be inserted, as shown in Figure 1.

Insert the memory stick: First determine the front and back sides. There is a small opening (notch) on the memory stick. Just line up this little opening with the bump on the memory module socket. After the small opening is aligned with the protrusion, the memory module can be inserted.

First of all, make sure the model of the memory slot in the computer host matches the model of the memory. If you don’t know the model, just check the location of the gap between the slot and the memory. Before inserting memory, first pull out the locks at both ends of the memory slot.

First cut off the power and open the chassis cover. The four vertical slots on the right side of the CPU slot are memory slots, arranged 1234 from left to right, and slot 4 has a higher priority than slot 3. There is a latch next to the memory module slot, which can be opened with just a slight pull.

How to add memory to the computer

1. Generally, the computer motherboard has at least two memory slots. If only one is used, there are still free slots, and the original memory can be retained. memory module, just insert the new memory module into the free slot.

2. How to increase computer memory. Method 1: Add a memory stick. First, check how much memory is left on your computer, and also know how much total memory it has. You just need to right-click on my Then find the properties bar of the computer. You can check whether the memory needs to be added by occupying this area.

3. Before inserting a new memory module, you must first determine the computer's operating system, whether it is 32 or 64-bit. If it is 32-bit, there is no need to expand the memory if it is added to 4G.

4. The collective operation is as follows: Press "Win+R" on the desktop to open the run window. Enter "dxdiag" and click "OK". You can see the computer memory in the pop-up page. Use relevant software to check the original notebook memory model. Different models of notebook memory cannot be mixed.

5. Memory installation steps: 1. Open the back cover of the notebook and just tighten the screws. Everyone can do it. 2Find the location of the memory slot. 3. Align the memory module into the slot, making sure that the corresponding gaps are aligned, otherwise it will not be inserted. 4. After plugging it in, press it gently to make the metal on both sides catch the memory module, so that the memory is installed.

The above is the detailed content of How to install computer memory module. For more information, please follow other related articles on the PHP Chinese website!