After turning on the laptop, the screen goes black and only the mouse can move

The computer screen is black but the mouse can still move. Solution

1. When the computer is turned on, the screen is black and cannot be started. The solution is: use the PE boot disk to start the computer. If it still cannot be started, , then it is a hardware problem and needs to be repaired.

2. It is recommended to uninstall the third-party security anti-virus software to test if the problem is temporarily uninstalled; restart the computer to check whether the fault is completely resolved.

3. Method 1: Restart the computer, press F8, enter the boot menu, and select "Use last known good configuration" to start the computer. When the computer turns on, the screen is black and cannot be started. The solution is: use the PE boot disk to start the computer. If it still cannot be started, then it is a hardware problem and requires repair.

Why the laptop has a black screen and the mouse can move?

1. The problem of the laptop having a black screen and the mouse moving is usually caused by system or hardware problems. Here are some possible solutions: Press and hold the power button for about 10 seconds to restart the computer. If the problem persists, try another method.

2. First of all, it may be a hardware problem. The hardware itself has too many bad sectors, so only the mouse can display. In this case, you can use a USB flash drive to test the hard drive. If there are too many bad sectors, the only way is to replace the hard drive. Furthermore, it may be that the C drive memory is full.

3. Graphics card driver problem. There may be a problem with the graphics card driver, causing the screen to not display properly. At this point the mouse can be moved, but nothing happens on the screen. You can try entering safe mode, uninstalling the graphics card driver and reinstalling the latest driver. Corrupted system files. The black screen may be caused by corrupted system files.

4. A black screen on a computer is a relatively common phenomenon, especially in some older computers or assembled computers. If your computer turns on and a black screen appears, but the mouse arrow can move, it may be a problem caused by the explorer.exe system file.

What is the reason why only the mouse can be seen after the laptop turns on and the screen goes black?

1. The black screen is caused by software. Sometimes after installing some software or hardware drivers, you may find that after restarting, the computer cannot enter the system and the screen remains black. In this case, the laptop screen is black due to software.

2. The black screen when the computer starts may be caused by damage to the motherboard, monitor and graphics card in the computer, or the computer configuration is too old. This phenomenon may also occur. Most of the reasons are caused by process errors. You can follow the steps below to troubleshoot.

3. A black screen on a computer is a relatively common phenomenon, especially in some older computers or assembled computers. If your computer turns on and a black screen appears, but the mouse arrow can move, it may be a problem caused by the explorer.exe system file.

What should I do if the computer starts up with a black screen and only the mouse can move?

1. Method 1: Restart the computer, press F8, enter the startup menu, and select "Use last known good configuration" to start the computer. When the computer turns on, the screen is black and cannot be started. The solution is: use the PE boot disk to start the computer. If it still cannot be started, then it is a hardware problem and requires repair.

2. Restart the computer. If you can enter the system normally, it means that the last abnormality was just an occasional program or system operation error and does not matter.

3. The problem of black screen on laptop and mouse being able to move is usually caused by system or hardware problems. Here are some possible solutions: Press and hold the power button for about 10 seconds to restart the computer. If the problem persists, try another method.

4. After turning on the computer, the monitor screen is black (only the mouse), as shown in the picture. First start the Task Manager (ctrl+shift+delete or Ctrl+Alt+.). After opening the "Task Manager" window as shown in the figure, select the "Process" option, find the explorer.exe process, right-click the mouse to end the process.

5. The computer turns on with a black screen and cannot start. The solution is: use the PE boot disk to start the computer. If it still cannot start, then it is a hardware problem and requires repair.

6. Method: Try pressing the Ctrl+Alt+Delete keys on the keyboard to bring up the Windows Advanced Startup Options, and select Start Task Manager in the options. After starting the Windows Task Manager, select File-New Run Task.

What’s wrong with a black screen when the computer starts up, but there is a mouse cursor?

1. Because most black screens are basically caused by a certain service in Windows, restarting the computer can solve the problem of a black screen with only a mouse cursor. It's a pointer problem. Method 2: Turn on the computer, long press "shift", select safe mode in the menu, log in normally and open it, then restart the computer, and that's basically it.

2. After the computer is turned on, the display screen is black with only the mouse arrow. What is going on? This is because the Explorer resource manager has not started. The solution is to start the task manager first, and then manually start the Explorer resource. Manager will solve the problem.

3. Cause of the fault: There are too many files in the computer and the data is processed incorrectly. Generally, the mouse appears indicating that some of the data is correct. Solution: Press the shortcut keys Ctrl+Alt+Del to enter the Task Manager when the screen is black. Then click File, create a new one, and enter explorer in the pop-up Create New Task.

4. When the computer is turned on, the screen is black, the fan is spinning, the mouse and keyboard are on, but the mouse cursor is not displayed on the screen. What is the situation? First check the wiring, whether the connection between the display and the power supply, and the computer is loose. Open the case and check whether the hard drive and graphics card connections are loose.

5. After booting, the screen is black and there is a mouse, which means that the resource manager is not loaded, or the loading fails. You can bring up the task manager, enter explorer to restart, and the desktop can be displayed. Reason for black screen: Black screen caused by software.

The above is the detailed content of After turning on the laptop, the screen goes black and only the mouse can move. For more information, please follow other related articles on the PHP Chinese website!