How to assemble and turn on the computer? How to turn on the computer without assembling it?

Troubled with computer boot problems? Don't hesitate! PHP editor Strawberry will give you the answer! This article will analyze in detail the steps to assemble and start up a computer and solve your troubles step by step. If you haven't built your computer yet, don't worry, the article also covers boot troubleshooting guidelines. Read this article, say goodbye to boot troubles, and enjoy a smooth experience!

How to assemble and turn on the computer?

When assembling a computer, the first step is to select the motherboard, CPU, and memory. harddisk. graphics card. chassis and power supply.

The second keyboard, mouse, monitor, camera and other peripherals.

The third part is assembled. Insert the cpu, hard drive, and graphics card. Power supply, etc. are connected as required. The keyboard, mouse, and monitor peripherals are connected to the corresponding interfaces.

The fourth step is to choose a windows system or a linux system when making a system disk. The fifth step is to install the system.

The sixth part starts.

How to turn on the computer without assembling it?

If there is no chassis: Find the double row of bare pins from the motherboard (usually including PWR_LED, RST, HDD_LED, PWR, etc., meaning: power indicator light, restart, hard disk indicator light, power supply) . Just short-circuit the two pins of the power supply (connect them with a conductor). If you are using a tractor card: you still need to turn on the power of the host.

How to assemble and start a desktop computer?

Assemble a desktop computer and reinstall the system:

1. Make a USB flash drive, then go to the relevant website to download the win system and save it to the USB boot disk, restart the computer and wait for the boot screen to appear and press Start Shortcut key, select u disk boot to enter the u boot main menu, select the "u boot WIN8PE standard version (new machine)" option, press the Enter key to confirm

2. Select the win image in the pe installation tool Place it in the c drive and click OK

3. At this time, click the "OK" button directly in the pop-up prompt window

4. Then the installation tool starts to work, we need to wait patiently for a few minutes

5. After completion, a pop-up prompt box will prompt whether to restart immediately. At this time, we can just click Restart Now.

6. At this time, you can remove the USB disk and restart the system to start the installation. We do not need to perform any operations, just wait for the installation to complete.

How to set up the startup of a newly assembled computer?

After assembling the computer by yourself, don’t rush to turn it on. Check whether the hardware is plugged in securely, and then plug it in and try to turn it on. Since the newly installed computer does not have a system, after turning it on, go to the bios to check various motherboard settings and install it. Before the win system, if you install the system from a USB flash drive, first set the first boot item of the bios to USB boot. After restarting, you can insert the USB flash drive to install the system.

How to turn on the computer after assembling it yourself?

After the computer is assembled, make sure that all the internal power cords are connected in place. After confirmation, connect the power supply and start the computer directly.

There is no need for you to do anything. Once the computer starts up normally, it means that the computer has been successfully assembled.

Then enter the system and see if it can operate normally. It is best if it can continue to run for a period of time. If it does not malfunction, it means that your computer is installed well.

How to insert the power button on the assembled computer?

Step 1: Preparation

Before installing the computer power-on key, you need to prepare the following tools and materials:

1. Computer power-on key

2. Screwdriver

3. Wire pliers

4. Wire sleeve

5. Wire

Step 2: Open the computer case

First, you need to open the computer case. Use a screwdriver to remove the screws from the case and open the sides of the case.

Step 3: Find the power button socket

After opening the case, you need to find the power button socket. It's usually located on the motherboard, and you can check the motherboard's manual to determine its location.

Step 4: Connect the wire

Insert the wire into the power button socket. Then, use wire cutters to secure the wire to the outlet. To protect your wires, you can put wire sleeves on them.

Step 5: Install the power button

Now, you can install the power button on the chassis. Place the power button in a suitable position on the chassis, and then use a screwdriver to secure it to the chassis.

Step 6: Test the power button

After the installation is complete, you need to test whether the power button is working properly. Press the power button and see if the computer starts normally. If the computer won't start, you need to check that the connections are correct.

Step 7: Close the chassis

After the test is completed, you need to close the chassis. Use a screwdriver to tighten the screws on the case and make sure the case is securely closed.

What are the correct steps to assemble and turn on a computer?

The steps for booting the computer into the system for the first time after it is assembled are as follows.

1. Directly select the startup item. After booting, immediately press F12, or use the Fn and F12 keys to enter the quick startup options interface.

2. Enter the startup item selection interface. There are startup items for hard disk, CD, and U disk. Select the name of the device and press Enter. You can use the device to start the computer. To learn the name of the startup device, you can go to You will know in the device manager.

3. Check the motherboard manual. After purchasing a computer or motherboard, there will be a manual that will introduce how to enter the system.

Assembling a computer without a case, how to turn it on and restart it?

If you are assembling a computer without a case, you need to read the motherboard manual carefully. There is a row of short pins on the motherboard that are connected to the wires on the chassis. The short pins here are the switch, rest, hard drive light, power light, and yes, speakers and empty pins.

You use a small metal object, such as a key, to search for the pws two short pins on this row of short pins. As long as the metal object comes into contact with these two short pins, the phone will turn on. Then go to It will shut down when touched.

How to turn on and restart the computer without a case after assembling it?

1. First, make sure that the computer accessories and the motherboard are all connected properly.

2. Then we find the power-on pin position on the computer motherboard.

3. If your friend has There is a switch cable on the motherboard, we will use the switch cable to connect it to the motherboard

4. Make sure the operating system has been installed on the hard disk. Friends who have not installed the operating system can first prepare a USB boot disk

5. Power on the chassis and press the switch cable button. If you don’t have a switch cable, you can use a screwdriver to short-circuit the power and power-pins on the motherboard to trigger the computer to boot.

6. Those who have the operating system installed on the hard disk can directly enter the operating system. Those who do not have the operating system on the hard disk need to press the keyboard to enter the U disk boot, and then install the operating system on the computer. After the installation is completed, it can be used.

How to unlock the computer if you forget the power-on password?

1. Restart the computer. When the computer's login page displays, press the Ctrl Alt key combination on your keyboard simultaneously, then tap Del repeatedly.

2. Enter the username: Administrator, no password is required, and then press Enter. After logging in, open the Control Panel ->"User Accounts"->"Change User"->Click on the old "Username"->"Change My Password"->Enter the new "Password"- >"Change Password"".

The above is the detailed content of How to assemble and turn on the computer? How to turn on the computer without assembling it?. For more information, please follow other related articles on the PHP Chinese website!