Chassis assembly steps? What are the steps to assemble the main chassis?

Are you confused about how to assemble the chassis? do not worry! PHP editor Strawberry has prepared detailed assembly steps for you, covering every link from selecting parts to completing assembly. Come and find out!

Chassis assembly steps?

1. Step 1: Tools and components. First of all, you need to prepare the corresponding tools, such as screwdrivers and screwdrivers. Usually, simple tools are given when you purchase the case. At the same time, you must also prepare various components of the host such as motherboard, graphics card, memory stick, CPU, power supply, chassis, etc.

2. Step 2: Install the CPU. The installation of the host starts with the CPU. Unpack the motherboard and CPU packaging boxes, take out the motherboard, find the location of its CPU interface, press the lever downward to open it, then take out the CPU and align it for installation. Be gentle. Be slow and careful to avoid bending the CPU pins.

3. Step 3: Install the cooling fan. If it is a boxed CPU, it will come with a cooling fan, which can be installed on the motherboard together with the CPU. If you purchase a separate cooling fan yourself, you need to apply silicone grease to the CPU before installing the fan.

　4. Step 4: Install the power supply. Put the motherboard with the CPU installed next to it, first disassemble the case and then install the power supply. Here you need to use a screwdriver to tighten the screws to fix the power supply in the case, and remove some cards on the back of the case to facilitate the installation of the motherboard later.

5. Step 5: Install the motherboard. After the power supply is installed, you can fix the motherboard inside the chassis, determine the installation direction, and then use screws to fix the motherboard. Be careful not to make a mistake. You can confirm it by looking at the slot of the graphics card. It is generally easier to find the direction.

6. Step 6: Install the memory module. Take out the memory stick. If it is two memory sticks, it is recommended to install it in slots 1-3. If it is a single memory stick, install it in the second slot. After the memory stick is installed, press the fixing rings on both sides to ensure The memory stick will not loosen.

7. Step 7: Install the graphics card. Then take out the graphics card, align it with the slot and install it. At the same time, use a screwdriver to fix the graphics card on the chassis to ensure that the graphics card does not shake left and right, and the interface of the graphics card needs to face the outside of the chassis.

8. Step 8: Wiring. After these are installed, you can observe the layout of the chassis, and then start wiring. In principle, it is better to be as simple as possible. You need to connect the graphics card, motherboard and power supply. At the same time, the motherboard may also need to be connected to the graphics card.

8. Step 9: Others. If there is an optical drive on the host, you need to install it on the upper part of the chassis and fix it with a screwdriver. Then connect the power supply and motherboard. After all the cables are connected, you can connect the monitor to test whether it can boot normally.

What are the steps to assemble the main chassis?

Before the chassis is assembled, the motherboard and its accessories must be matched. The order is generally: processor, radiator, memory, graphics card, hard disk, optical drive, power supply, various data cables and power cables. Do not install them into the chassis after completion. Light them up first. If there is no problem, then install them into the chassis. Connect the monitor, mouse, keyboard, speakers, headphones and other peripherals, and turn on the power. If it boots normally, you can start the system.

Is it common to assemble computer cases?

generic.

is universal, but you should note that there are differences in sizes.

A large motherboard can be used with a large chassis, and a small motherboard can be used in any size chassis.

Some small cases can also support large motherboards. The motherboard specifications indicate which motherboards are supported.

The highest configuration to assemble a computer case?

Intel i99980XE boxed, 17,299 pieces, Asus X299 R6E motherboard, 10,000 pieces, Corsair 16GDDR43200 Platinum Ruler Blocks, ASUS RTX2080ti-O11G Raptor, two sheets, 25,999 blocks, Corsair AX1600i rated 1600W power supply, 2,999 blocks, ASUS RGB RGB GX601 Helios chassis, 1,899 blocks, Corsair 150iPRORGB integrated water-cooled 360 radiator, 1,299 blocks, Samsung C49RG90SSC monitor 4K resolution Rate + 120 refresh rate 48.8-inch curved screen, 16,999 yuan,

Can a computer be assembled into a mac chassis?

MAC signs should not assemble ordinary compatible computers. Because when MAC first appeared, it adopted a standard that was incompatible with ordinary computers. Just because different hardware standards are implemented on the hardware, the internal components of the two cannot be used universally. The specifications of the internal components of the two machines are also different. In terms of the price-performance ratio of the internal structure, both have their own advantages and disadvantages.

What kind of chassis should I choose when assembling a computer?

I like side-transparent chassis. I like to play games, so the requirement for the chassis is to have good heat dissipation. The computer host chassis I assembled recently is Patriot, Daybreak X chassis, with a vertically mounted graphics card. Yes, the side-transparent chassis has light effects after assembly and has good heat dissipation.

Can I assemble the Lenovo computer case by myself?

Lenovo computer chassis can be assembled by yourself. Since Lenovo computer motherboards and power supplies are all standard, we can use other brands of chassis to replace Lenovo computer Jixiang. Remove the Lenovo computer motherboard and power supply. After downloading, install it into a new chassis. At the same time, install the hard disk and other things in the chassis, so that it can be used normally by connecting a few signal lines.

How to assemble a new computer from an old chassis?

After removing the old motherboard and installing the new motherboard, you can install new accessories on the new motherboard.

Detailed explanation of the steps to assemble a computer?

To assemble a computer, please refer to the following steps:

1. First install the CPU, install the CPU fan and CPU together on the motherboard, and fix the screws.

2. Install the memory, insert the memory into the memory slot of the motherboard, and make sure the memory is inserted correctly to avoid compatibility issues.

3. Install the hard drive, fix the hard drive on the 3.5-inch hard drive bracket of the chassis, and insert it into the SATA interface of the motherboard.

4. Install the graphics card, insert the graphics card into the PCI-E slot of the motherboard, and fix the screws.

5. Install the power supply, insert the power supply into the chassis and secure the screws.

6. Install the optical drive. If you need to use the optical drive, insert it into the optical drive compartment of the chassis and fix the screws.

7. Connect the front panel cable of the chassis, find the corresponding interface and insert it into the corresponding interface of the motherboard.

8. Install the operating system and drivers. You can get the corresponding CD or download the corresponding driver when purchasing the hardware.

What are the steps to assemble a computer?

Step 1 of assembling a computer

The first is the installation of the chassis, which mainly involves unpacking the chassis and installing the power supply in the chassis, then installing the motherboard and installing the motherboard on the chassis motherboard , assemble the computer and then install the CPU, insert the required CPU into the motherboard processor socket, and install the cooling fan, assemble the memory module in the computer, and insert the memory module into the motherboard memory slot.

Assemble the computer step 2

The next step is to install the graphics card, select the appropriate slot according to the graphics card bus; assemble the computer and install the sound card. Most of the mainstream sound cards in the market now are sound cards with PCI slots; The installation of drives mainly focuses on the installation of hard disks, optical drives and floppy drives; then there is the assembly of the connections between the computer chassis and the motherboard, that is, various indicator lights and power switch wires. The connection of PC speakers, as well as the connection of power cables and data cables of hard disk, optical drive and floppy drive.

Step 3 of assembling a computer

The third step of assembling a computer is to close the chassis cover. Theoretically, after installing the host, you can close the chassis cover, but in order to avoid problems later For inspection, it is best not to cover it first, and then cover it after the system is installed. Then there is the installation of input devices. When assembling the computer, you also need to connect the keyboard and mouse to integrate with the host; the installation of output devices, that is, the installation of the monitor; and then Recheck each wiring connection and prepare for testing.

Step 4 of Assembling a Computer

Assemble the computer and power up the machine. If the monitor can display normally, it means that the initial installation has been correct. At this time, enter the BIOS for initial system settings. After completing the above steps of assembling the computer, the general hardware installation is basically completed, but to make the computer run, the following installation steps are required.

Step 5 of assembling a computer

The next step is to assemble the computer's partitioned hard drive and format the hard drive, and install the operating system, such as Windows 98 or Windows XP. After assembling the computer and installing the operating system, install drivers such as graphics card, sound card and other drivers; perform a 72-hour bake-in. If there is a hardware problem, it will be discovered during the 72-hour bake-in.

The above is the detailed content of Chassis assembly steps? What are the steps to assemble the main chassis?. For more information, please follow other related articles on the PHP Chinese website!