管理ONS(OracleNotificationService)

Onsctl Onsctl这个命令是用来管理ONS(Oracle Notification Service)是OracleClustser实现FAN Event Push模型的基

Onsctl

Onsctl这个命令是用来管理ONS(Oracle Notification Service)是OracleClustser实现FAN Event Push模型的基础。

Oracle Notification Service (ONS)--A publish and subscribe service for communicating Fast Application Notification (FAN) events.

在RAC环境下，需要使用$CRS_HOME下的ONS，而不是$ORACLE_HOME下的ONS，这点需要注意。配置文件位于$CRS_HOME/opmn/conf/ons.config。

[oracle@felix2 conf]$ pwd

/u01/oracle/10.2.0/crs_1/opmn/conf

[oracle@felix2 conf]$ cat ons.config

localport=6113

remoteport=6200

loglevel=3

useocr=on

[oracle@felix2 conf]$ netstat -ano | grep 6200

tcp 0 0 0.0.0.0:6200 0.0.0.0:* LISTEN off (0.00/0/0)

tcp 0 0 192.168.10.102:8471 192.168.10.101:6200 ESTABLISHED off (0.00/0/0)

[oracle@felix2 conf]$ netstat -ano | grep 6113

tcp 0 0 127.0.0.1:6113 0.0.0.0:* LISTEN off (0.00/0/0)

tcp 0 0 127.0.0.1:42331 127.0.0.1:6113 ESTABLISHED keepalive (2251.34/0/0)

tcp 0 0 127.0.0.1:42328 127.0.0.1:6113 ESTABLISHED keepalive (2185.99/0/0)

tcp 0 0 127.0.0.1:6113 127.0.0.1:42331 ESTABLISHED off (0.00/0/0)

tcp 0 0 127.0.0.1:6113 127.0.0.1:42328 ESTABLISHED off (0.00/0/0)

unix 3 [ ] STREAM CONNECTED 6113

[oracle@felix2 conf]$

配置ONS:

添加ONS:

[oracle@felix2 conf]$ racgons add_configfelix11:6200 felix22:6200

删除ONS:

[oracle@felix2 conf]$ racgons remove_configfelix11:6200 felix22:6200

[oracle@felix2 conf]$

Onsctl命令：

使用onsctl命令可以启动、停止、调试ONS，并重新载入配置文件，其命令格式如下：

注意：

ONS进程运行，并不一定代表ONS正常工作，需要使用ping命令来确认。

[oracle@felix2 conf]$ onsctl

usage: /u01/oracle/10.2.0/db_1/bin/onsctlstart|stop|ping|reconfig|debug

start - Start opmn only.

stop - Stop ons daemon

ping - Test to see ifons daemon is running

debug - Display debuginformation for the ons daemon

reconfig - Reload the onsconfiguration

help - Print a shortsyntax description (this).

detailed - Print a verbosesyntax description. 

（1）在os级别查看进程

[oracle@felix2 conf]$ ps -ef | grep ons

root 2530 1 0 20:19 ? 00:00:00 sendmail: acceptingconnections

oracle 5223 1 0 20:22 ? 00:00:00/u01/oracle/10.2.0/crs_1/opmn/bin/ons -d

oracle 5224 5223 0 20:22 ? 00:00:00 /u01/oracle/10.2.0/crs_1/opmn/bin/ons-d

oracle 10833 29589 0 21:59 pts/2 00:00:00 grep ons

[oracle@felix2 conf]$ 

（2）确认ONS服务的状态 

[oracle@felix2 conf]$ onsctl ping

Number of configuration nodes retrieved: 2

0: {node = felix1, port = 6200}

Adding remote host felix1:6200

1: {node = felix2, port = 6200}

Remote port for local node in local config doesnot match that from OCR.

ons is not running ...

[oracle@felix2 conf]$ 

从输出的信息课件，ONS服务是停止的。 

（3）启动ONS服务

[oracle@felix2 conf]$ onsctl start

Number of configuration nodes retrieved: 2

0: {node = felix1, port = 6200}

Adding remote host felix1:6200

1: {node = felix2, port = 6200}

……

…… 

Configuring ONS for Fast Connection Failover

In order for Fast Connection Failover to work, you must configure ONS correctly. ONS is shipped as part of Oracle Database 11g.

This section covers the following topics:

ONS Configuration File

Client-Side ONS Configuration

Server-Side ONS Configuration Using racgons

Remote ONS Subscription

ONS Configuration File

ONS configuration is controlled by the ONS configuration file, ORACLE_HOME/opmn/conf/ons.config. This file tells the ONS daemon details about how it should behave and who it should talk to. Configuration information within ons.config is defined in simple name and value pairs. There are three values that should always be configured within ons.config. The first is localport, the port that ONS binds to on the localhost interface to talk to local clients. An example of thelocalport configuration is the following:

localport=4100

The second value is remoteport, the port that ONS binds to on all interfaces for talking to other ONS daemons. An example of the remoteport configuration is the following:

remoteport=4200

The third value specifies nodes, a list of other ONS daemons to talk to. Node values are given as a comma-delimited list of either host names or IP addresses plus ports. Note that the port value that is given is the remote port that each ONS instance is listening on. In order to maintain an identical file on all nodes, thehost:port of the current ONS node can also be listed in the nodes list. It will be ignored when reading the list.

The nodes listed in the nodes line correspond to the individual nodes in the RAC instance. Listing the nodes ensures that the middle-tier node can communicate with the RAC nodes. At least one middle-tier node and one node in the RAC instance must be configured to see one another. As long as one node on each side is aware of the other, all nodes are visible. You need not list every single cluster and middle-tier node in the ONS config file of each Oracle RAC node. In particular, if one ONS config file cluster node is aware of the middle tier, then all nodes in the cluster are aware of it.

An example of the nodes configuration is the following:

nodes=myhost.example.com:4200,123.123.123.123:4200

There are also several optional values that can be provided in ons.config.The first optional value is a loglevel. This specifies the level of messages that should be logged by ONS. This value is an integer that ranges from 1, which indicates least messages logged, to 9, which indicates most messages logged. The default value is 3. The following is an example:

loglevel=3

The second optional value is a logfile name. This specifies a log file that ONS should use for logging messages. The default value for logfile is$ORACLE_HOME/opmn/logs/ons.log. The following is an example:

logfile=/private/oraclehome/opmn/logs/myons.log

The third optional value is a walletfile name. A wallet file is used by the Oracle Secure Sockets Layer (SSL) to store SSL certificates. If a wallet file is specified to ONS, it will use SSL when communicating with other ONS instances and require SSL certificate authentication from all ONS instances that try to connect to it. This means that if you want to turn on SSL for one ONS instance, then you must turn it on for all instances that are connected. This value should point to the directory where your ewallet.p12 file is located. The following is an example:

walletfile=/private/oraclehome/opmn/conf/ssl.wlt/default

One optional value is reserved for use on the server-side. useocr=on is used to tell ONS to store all Oracle RAC nodes and port numbers in Oracle Cluster Registry (OCR) instead of in the ONS configuration file. Do not use this option on the client-side.

The ons.config file allows blank lines and comments on lines that begin with the number sign (#).

Client-Side ONS Configuration

You can access the client-side ONS through ORACLE_HOME/opmn. On the client-side, there are two ways to set up ONS:

Remote ONS configuration

See Also:

"Remote ONS Subscription"

ONS daemon on the client-side

Example 26-1 illustrates how a sample configuration file may look.

Example 26-1 Example of a Sample ons.config File

# This is an example ons.config file
#
# The first three values are required
localport=4100
remoteport=4200
nodes=racnode1.example.com:4200,racnode2.example.com:4200

After configuring ONS, you start the ONS daemon with the onsctl command. It is the user's responsibility to make sure that an ONS daemon is running at all times.

Using the onsctl Command

After configuring, use ORACLE_HOME/opmn/bin/onsctl to start, stop, reconfigure, and monitor the ONS daemon. Table 26-1 is a summary of the commands thatonsctl supports.

Table 26-1 onsctl Commands

Command	Effect	Output
start	Starts the ONS daemon	onsctl: ons started
stop	Stops the ONS daemon	onsctl: shutting down ons daemon...
ping	Verifies whether or not the ONS daemon is running	ons is running ...
reconfig	Triggers a reload of the ONS configuration without shutting down the ONS daemon
help	Prints a help summary message for onsctl
detailed	Prints a detailed help message for onsctl

Server-Side ONS Configuration Using racgons

You can access the server-side ONS through ORA_CRS_HOME/opmn. You configure the server-side by using racgons to add the middle-tier node information to OCR. This command is found in ORA_CRS_HOME/bin/racgons. Before using racgons, you must edit ons.config to set useocr=on.

The middle-tier nodes should be configured in OCR, so that all nodes share the configuration, and no matter which Oracle RAC nodes are up they can communicate to the middle-tier. When running on a cluster, always configure the ONS hosts and ports not by using the ONS configuration files but usingracgons. The racgons command stores the ONS hosts and ports in OCR, where every node can see it. That way, you do not need to edit a file on every node to change the configuration, just run a single command on one of the cluster nodes.

The racogns command enables you to specify hosts and ports on one node, then propagate your changes among all nodes in a cluster. The command takes two forms:

racgons add_config hostname:port [hostname:port] [hostname:port] ...
racgons remove_config hostname[:port] [hostname:port] [hostname:port] ...

The add_config version adds the listed host name(s), the remove_config version removes them. Both commands propagate the changes among all instances in a cluster.

If multiple port numbers are configured for a host, the specified port number is removed from hostname. If only hostname is specified, all port numbers for that host are removed.

See Also:

Oracle Real Application Clusters Administration and Deployment Guide

Other Uses of racgons

You should run racgons whenever you add a new node to the cluster.

Remote ONS Subscription

The advantages of remote ONS subscription are the following:

Support for an All Java middle-tier stack

No ONS daemon needed on the client computer and, therefore, no need to manage this process

Simple configuration using the DataSource property

When using remote ONS subscription for Fast Connection Failover, the application invokes the following method on an OracleDataSource instance:

setONSConfiguration(String remoteONSConfig)

The remoteONSConfig parameter is a list of name and value pairs of the form name=value that are separated by a new line character (\n). name can be one ofnodes, walletfile, or walletpassword. This parameter should specify at least the nodes ONS configuration attribute, which is a list of host:port pairs, each pair separated by comma (,). The hosts and ports denote the remote ONS daemons available on the Oracle RAC nodes.

See Also:

"ONS Configuration File"

SSL could be used in communicating with the ONS daemons when the walletfile attribute is specified as an Oracle wallet file. In such cases, if thewalletpassword attribute is not specified, single sign-on (SSO) would be assumed.

Following are a few examples, assuming ods is an OracleDataSource instance:

ods.setONSConfiguration("nodes=racnode1.example.com:4200,racnode2.example.com:4200");

ods.setONSConfiguration("nodes=racnode1:4200,racnode2:4200\nwalletfile=/mydir/Wallet\nwalletpassword=mypasswd");

ods.setONSConfiguration("nodes=racnode1:4200,racnode2:4200\nwalletfile=/mydir/conf/Wallet");

Note:

The ons.jar file must be in the CLASSPATH on the client. In the case of Oracle Application Server, ONS is embedded in Oracle Process Manager and Notification Server (OPMN), as before, and JDBC Fast Connection Failover continues to work as before.

Enabling Fast Connection Failover

An application enables Fast Connection Failover by calling setFastConnectionFailoverEnabled(true) on a DataSource instance, before retrieving any connections from that instance.

You cannot enable Fast Connection Failover when reinitializing a connection cache. You must enable it before using the OracleDataSource instance.

Example 26-2 illustrates how to enable Fast Connection Failover.

Note:

After a cache is Fast Connection Failover-enabled, you cannot disable Fast Connection Failover during the lifetime of that cache.

To enable Fast Connection Failover, you must perform the following:

Configure and start ONS. If ONS is not correctly set up, then implicit connection cache creation fails and an ONSException is thrown at the firstgetConnection request.

Set the FastConnectionFailoverEnabled property before making the first getConnection request to an OracleDataSource. When Fast Connection Failover is enabled, the failover applies to all connections in the connection cache. If your application explicitly creates a connection cache using the Connection Cache Manager, then you must first set FastConnectionFailoverEnabled before retrieving any connections.

Use a service name rather than a service identifier when setting the OracleDataSource url property.

Example 26-2 Enabling Fast Connection Failover

// declare datasource
ods.setUrl(
"jdbc:oracle:oci:@(DESCRIPTION=
  (ADDRESS=(PROTOCOL=TCP)(HOST=cluster_alias)
    (PORT=1521))
    (CONNECT_DATA=(SERVICE_NAME=service_name)))");
ods.setUser("scott");
ods.setConnectionCachingEnabled(true);
ods.setFastConnectionFailoverEnabled(true):
ctx.bind("myDS",ods);
ds=(OracleDataSource) ctx.lookup("MyDS");
try {
 ds.getConnection();  // transparently creates and accesses cache
 catch (SQLException SE {
  }
}
...

Querying Fast Connection Failover Status

An application determines if Fast Connection Failover is enabled by calling OracleDataSource.getFastConnectionFailoverEnabled, which returns true if failover is enabled, false otherwise.

Understanding Fast Connection Failover

After Fast Connection Failover is enabled, the mechanism is automatic; no application intervention is needed. This section discusses how a connection failover is presented to an application and what steps the application takes to recover.

This section covers the following topics:

What the Application Sees

How It Works

What the Application Sees

By the time an Oracle RAC service failure is propagated to the JDBC application, the database already rolls back the local transaction. The cache manager then cleans up all invalid connections. When an application holding an invalid connection tries to do work through that connection, it is possible to receiveSQLException, ORA-17008, Closed Connection.

When an application receives a Closed Connection error message, it should do the following:

Retry the connection request. This is essential, because the old connection is no longer open.

Replay the transaction. All work done before the connection was closed has been lost.

Note:

The application should not try to roll back the transaction. The transaction was already rolled back in the database by the time the application received the exception.

How It Works

Under Fast Connection Failover, each connection in the cache maintains a mapping to a service, instance, database, and host name.

When a database generates an Oracle RAC event, that event is forwarded to the JVM in which JDBC is running. A daemon thread inside the JVM receives the Oracle RAC event and passes it on to the Connection Cache Manager. The Connection Cache Manager then throws SQL exceptions to the applications affected by the Oracle RAC event.

A typical failover scenario may work like the following:

A database instance fails, leaving several stale connections in the cache.

The RAC mechanism in the database generates an Oracle RAC event which is sent to the JVM containing JDBC.

The daemon thread inside the JVM finds all the connections affected by the Oracle RAC event, notifies them of the closed connection through SQL exceptions, and rolls back any open transactions.

Each individual connection receives a SQL exception and must retry.

Comparison of Fast Connection Failover and TAF

Fast Connection Failover differs from Transparent Application Failover (TAF) in the following ways:

Application-level connection retries

Fast Connection Failover supports application-level connection retries. This gives the application control of responding to connection failovers. The application can choose whether to retry the connection or to rethrow the exception. TAF supports connection retries only at the OCI/Net layer.

Integration with the implicit connection cache

Fast Connection Failover is well-integrated with the implicit connection cache, which allows the Connection Cache Manager to manage the cache for high availability. For example, failed connections are automatically invalidated in the cache. TAF works at the network level on a per-connection basis, which means that the connection cache cannot be notified of failures.

Event-based

Fast Connection Failover is based on the Oracle RAC event mechanism. This means that Fast Connection Failover is efficient and detects failures quickly for both active and inactive connections.

Load-balancing support

Fast Connection Failover supports UP event load balancing of connections and run-time work request distribution across active Oracle RAC instances.