分享技术:基于固定IP的ADSL配置实例
- WBOYOriginal
- 2016-06-07 15:06:341082browse
bridge irb ! !-------启用集成路由桥接模式 ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip nat inside ff0099> !-------配置内网接口 ! interface ATM0 no ip address no atm ilmi-keepalive pvc 0/35 encapsulation aal5snap ! bundle-
bridge irb!
!-------启用集成路由桥接模式
!
interface Ethernet0
ip address 192.168.0.254 255.255.255.0
ip nat inside
ff0099> !-------配置内网接口
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/35
encapsulation aal5snap
!
bundle-enable
dsl operating-mode auto
bridge-group 1
!
!--------配置ATM接口，把ATM0接口归属于bridge-group 1
!
interface BVI1
ip address 171.68.1.1 255.255.255.240
ip nat outside
!---------配置虚拟桥接组1做为NAT的外部接口
!
ip nat inside source list 1 interface BVI1 overload
ip nat inside source static tcp 192.168.0.5 80 171.68.1.1 80 extendable
ip classless
ip route 0.0.0.0 0.0.0.0 171.68.1.254
access-list 1 permit 192.168.0.0 0.0.0.255
bridge 1 protocol ieee
bridge 1 route ip
!!---------配置桥接协议和IP协议
Statement：
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
Previous article：《find技巧》Next article：Pix-Pix的配置