Heim >Datenbank >MySQL-Tutorial >扩展rhel5.9下使用lvm管理的根分区

扩展rhel5.9下使用lvm管理的根分区

WBOY
WBOYOriginal
2016-06-07 16:13:131320Durchsuche

扩展rhel5.9下使用lvm管理的根分区 核心步骤: 添加sdb-----pvcreate-----vgextend-----lvextend-----resize2fs 文件系统信息如下: [root@rhel59 ~]# df -hFilesystem Size Used Avail Use% Mounted on/dev/mapper/VolGroup00-LogVol01 18G 8.1G 8.3G 50% /

扩展rhel5.9下使用lvm管理的根分区

核心步骤:

添加sdb----->pvcreate----->vgextend----->lvextend----->resize2fs


文件系统信息如下:

[root@rhel59 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol01
                       18G  8.1G  8.3G  50% /
/dev/sda1             190M   13M  168M   8% /boot
tmpfs                 500M     0  500M   0% /dev/shm


[root@rhel59 ~]# vgdisplay
  --- Volume group ---
  VG Name               VolGroup00
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  3
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               19.78 GB  ----------->此时vg的大小是19.78GB
  PE Size               32.00 MB
  Total PE              633
  Alloc PE / Size       633 / 19.78 GB
  Free  PE / Size       0 / 0   
  VG UUID               k9z3Ze-tAoj-Tajp-iECn-Ckrl-oWxZ-svnlsw


首先关闭rhel,加盘,之后启动rhel

[root@rhel59 ~]# fdisk -l

Disk /dev/sda: 21.4 GB, 21474836480 bytes
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          25      200781   83  Linux
/dev/sda2              26        2610    20764012+  8e  Linux LVM

Disk /dev/sdb: 21.4 GB, 21474836480 bytes   ----------->多了sdb
255 heads, 63 sectors/track, 2610 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb doesn't contain a valid partition table


[root@rhel59 ~]# pvcreate /dev/sdb          ----------->建立pv  
  Writing physical volume data to disk "/dev/sdb"
  Physical volume "/dev/sdb" successfully created


[root@rhel59 ~]# pvdisplay
--- Physical volume ---
PV Name /dev/sda2
VG Name VolGroup00
PV Size 19.80 GB / not usable 21.36 MB
Allocatable yes (but full)
PE Size (KByte) 32768
Total PE 633
Free PE 0
Allocated PE 633
PV UUID GCIoaR-YISf-ILdp-8dNL-zGoq-Qqmy-C2HHI0

"/dev/sdb" is a new physical volume of "20.00 GB"
--- NEW Physical volume ---
PV Name /dev/sdb
VG Name
PV Size 20.00 GB
Allocatable NO
PE Size (KByte) 0
Total PE 0
Free PE 0
Allocated PE 0
PV UUID L9cTfB-jeai-owEJ-8d9i-BdLk-4RLp-onedCq

[root@rhel59 ~]# which vgextend
/usr/sbin/vgextend
[root@rhel59 ~]# /usr/sbin/vgextend VolGroup00 /dev/sdb
  Volume group "VolGroup00" successfully extended
[root@rhel59 ~]# vgdisplay
  --- Volume group ---
  VG Name               VolGroup00
  System ID             
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  4
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               39.75 GB   ----------->此时vg的大小是39.75GB,多了接近20GB
  PE Size               32.00 MB
  Total PE              1272
  Alloc PE / Size       633 / 19.78 GB
  Free  PE / Size       639 / 19.97 GB
  VG UUID               k9z3Ze-tAoj-Tajp-iECn-Ckrl-oWxZ-svnlsw


[root@rhel59 ~]# lvextend -L 38500M /dev/mapper/VolGroup00-LogVol01
  Rounding up size to full physical extent 37.62 GB
  Extending logical volume LogVol01 to 37.62 GB
  Logical volume LogVol01 successfully resized
注意:上面的命令中 -L 38500M 的意思是扩展到38500MB;若是 -L +38500M ,则表示扩展了38500MB



[root@rhel59 ~]# lvdisplay
--- Logical volume ---
LV Name /dev/VolGroup00/LogVol01
VG Name VolGroup00
LV UUID zHqULI-llnJ-LFmp-Swux-U9EZ-RKHc-GoOQXD
LV Write Access read/write
LV Status available
# open 1
LV Size 37.62 GB ------------->此时lv已经变大。
Current LE 1204
Segments 2
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0

--- Logical volume ---
LV Name /dev/VolGroup00/LogVol00
VG Name VolGroup00
LV UUID wqoTR5-KRdn-IVjA-hLoS-M1w7-32CH-qgaZMk
LV Write Access read/write
LV Status available
# open 1
LV Size 2.00 GB
Current LE 【本文来自鸿网互联 (http://www.68idc.cn)】 64
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1

[root@rhel59 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol01
                       19G  8.1G  9.9G  45% /   --------------->此时文件系统空间还没有变化。
/dev/sda1             190M   13M  168M   8% /boot
tmpfs                 500M     0  500M   0% /dev/shm


[root@rhel59 ~]# resize2fs /dev/mapper/VolGroup00-LogVol01
resize2fs 1.39 (29-May-2006)
Filesystem at /dev/mapper/VolGroup00-LogVol01 is mounted on /; on-line resizing required
Performing an on-line resize of /dev/mapper/VolGroup00-LogVol01 to 9863168 (4k) blocks.
The filesystem on /dev/mapper/VolGroup00-LogVol01 is now 9863168 blocks long.
[root@rhel59 ~]# df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol01
                       37G  8.1G   27G  24% /
/dev/sda1             190M   13M  168M   8% /boot
tmpfs                 500M     0  500M   0% /dev/shm
[root@rhel59 ~]# vgdisplay
  --- Volume group ---
  VG Name               VolGroup00
  System ID             
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  6
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                2
  Open LV               2
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               39.75 GB
  PE Size               32.00 MB
  Total PE              1272
  Alloc PE / Size       1268 / 39.62 GB
  Free  PE / Size       4 / 128.00 MB
  VG UUID               k9z3Ze-tAoj-Tajp-iECn-Ckrl-oWxZ-svnlsw


Stellungnahme:
Der Inhalt dieses Artikels wird freiwillig von Internetnutzern beigesteuert und das Urheberrecht liegt beim ursprünglichen Autor. Diese Website übernimmt keine entsprechende rechtliche Verantwortung. Wenn Sie Inhalte finden, bei denen der Verdacht eines Plagiats oder einer Rechtsverletzung besteht, wenden Sie sich bitte an admin@php.cn
Vorheriger Artikel:MHA安装及等效性配置Nächster Artikel:检查selinux状态的方法